PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 206

no-image

PIC18F26K80-I/SO

Manufacturer Part Number
PIC18F26K80-I/SO
Description
MCU PIC 64KB FLASH 28SOIC
Manufacturer
Microchip Technology
Series
PIC® XLP™ 18Fr
Datasheet

Specifications of PIC18F26K80-I/SO

Core Size
8-Bit
Program Memory Size
64KB (32K x 16)
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Core Processor
PIC
Speed
64MHz
Connectivity
ECAN, I²C, LIN, SPI, UART/USART
Number Of I /o
24
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
3.6K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 8x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
28-SOIC (0.300", 7.50mm Width)
Controller Family/series
PIC18
Ram Memory Size
4KB
Cpu Speed
16MIPS
No. Of Pwm Channels
5
Embedded Interface Type
I2C, SPI, USART
Processor Series
PIC18F26K80
Core
PIC
Data Bus Width
8 bit
Data Ram Size
1 KB
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
64 MHz
Number Of Programmable I/os
24
Number Of Timers
5
Operating Supply Voltage
1.8 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC18F26K80-I/SO
Manufacturer:
Microchip Technology
Quantity:
135
Part Number:
PIC18F26K80-I/SO
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
Part Number:
PIC18F26K80-I/SO
0
PIC18F66K80 FAMILY
12.5
The signal provided from any selected input source for
the carrier high and carrier low signals can be inverted.
Inverting the signal for the carrier high source is
enabled by setting the MDCHPOL bit of the MDCARH
register. Inverting the signal for the carrier low source is
enabled by setting the MDCLPOL bit of the MDCARL
register.
12.6
Some peripherals assert control over their correspond-
ing output pin when they are enabled. For example,
when the CCP1 module is enabled, the output of CCP1
is connected to the CCP1 pin.
This default connection to a pin can be disabled by
setting the MDCHODIS bit in the MDCARH register for
the carrier high source and the MDCLODIS bit in the
MDCARL register for the carrier low source.
12.7
The MDBIT of the MDCON register can be selected as
the source for the modulator signal. This gives the user
the ability to program the value used for modulation.
DS39977C-page 206
Carrier Source Polarity Select
Carrier Source Pin Disable
Programmable Modulator Data
Preliminary
12.8
The modulator source default connection to a pin can
be disabled by setting the MDSODIS bit in the MDSRC
register.
12.9
The modulated output signal provided on the MDOUT
pin can also be inverted. Inverting the modulated out-
put signal is enabled by setting the MDOPOL bit of the
MDCON register.
12.10 Slew Rate Control
When modulated data streams of 20 MHz or greater
are required, the slew rate limitation on the output port
pin can be disabled. The slew rate limitation can be
removed by clearing the MDSLR bit in the MDCON
register.
12.11 Operation In Sleep Mode
The DSM module is not affected by Sleep mode. The
DSM can still operate during Sleep if the Carrier and
Modulator input sources are also still operable during
Sleep.
12.12 Effects of a Reset
Upon any device Reset, the data signal modulator
module is disabled. The user’s firmware is responsible
for initializing the module before enabling the output.
The registers are reset to their default values.
Modulator Source Pin Disable
Modulated Output Polarity
 2011 Microchip Technology Inc.

Related parts for PIC18F26K80-I/SO