PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 290

• Manufacturer Part Number: PIC18F26K80-I/SO
• Description: MCU PIC 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SO

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (0.300", 7.50mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F66K80 FAMILY
FIGURE 20-16:
FIGURE 20-17:
FIGURE 20-18:
DS39977C-page 290
Note 1: Port outputs are configured as displayed when
STR<D:A>
P1<D:A>
Port Data
P1A Signal
STR<D:A>
Port Data
Port Data
Port Data
P1<D:A>
CCP1M1
CCP1M0
CCP1M1
CCP1M0
2: Single PWM output requires setting at least
PWM
STRA
STRB
STRC
STRD
PWM
the CCP1CON register bits, P1M<1:0> = 00
and CCP1M<3:2> = 11.
one of the STR<D:A> bits.
Port Data
SIMPLIFIED STEERING
BLOCK DIAGRAM
EXAMPLE OF STEERING EVENT AT END OF INSTRUCTION (STRSYNC = 0)
EXAMPLE OF STEERING EVENT AT BEGINNING OF INSTRUCTION (STRSYNC = 1)
1
0
1
0
1
0
1
0
PWM Period
Port Data
TRIS
TRIS
TRIS
TRIS
Output Pin
Output Pin
Output Pin
Output Pin
(1,2)
Preliminary
P1n = PWM
20.4.7.1
The STRSYNC bit of the PSTR1CON register gives the
user two choices for when the steering event will
happen. When the STRSYNC bit is ‘ 0 ’, the steering
event will happen at the end of the instruction that
writes to the PSTR1CON register. In this case, the out-
put signal at the P1<D:A> pins may be an incomplete
PWM waveform. This operation is useful when the user
firmware needs to immediately remove a PWM signal
from the pin.
When the STRSYNC bit is ‘ 1 ’, the effective steering
update will happen at the beginning of the next PWM
period. In this case, steering on/off the PWM output will
always produce a complete PWM waveform.
Figures
of the PWM steering depending on the STRSYNC
setting.
P1n = PWM
20-17
Steering Synchronization
and
20-18
 2011 Microchip Technology Inc.
illustrate the timing diagrams
Port Data
Port Data