PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 465

• Manufacturer Part Number: PIC18F26K80-I/SO
• Description: MCU PIC 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SO

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (0.300", 7.50mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 28-3:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-5
bit 4-3
bit 2-1
bit 0
Note 1:
U-0
—
2:
For the specifications, see
(Industrial/Extended)”
The Power-up Timer is decoupled from Brown-out Reset, allowing these features to be independently
controlled.
Unimplemented: Read as ‘ 0 ’
BORPWR<1:0>: BORMV Power-Level bits
11 = ZPBORVMV instead of BORMV is selected
10 = BORMV is set to a high-power level
01 = BORMV is set to a medium power level
00 = BORMV is set to a low-power level
BORV<1:0>: Brown-out Reset Voltage bits
11 = B
10 = B
01 = B
00 = B
BOREN<1:0>: Brown-out Reset Enable bits
11 = Brown-out Reset is enabled in hardware only (SBOREN is disabled)
10 = Brown-out Reset is enabled in hardware only and disabled in Sleep mode (SBOREN is disabled)
01 = Brown-out Reset is enabled and controlled by software (SBOREN is enabled)
00 = Brown-out Reset is disabled in hardware and software
PWRTEN: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
BORPWR1
R/P-1
CONFIG2L: CONFIGURATION REGISTER 2 LOW (BYTE ADDRESS 300002h)
VDD
VDD
VDD
VDD
is set to 1.8V
is set to 2.0V
is set to 2.7V
is set to 3.0V
(1)
BORPWR0
P = Programmable bit
W = Writable bit
‘1’ = Bit is set
.
R/P-1
Section 31.1 “DC Characteristics: Supply Voltage PIC18F66K80 Family
(1)
BORV1
R/P-1
Preliminary
(2)
(1)
(1)
(1)
PIC18F66K80 FAMILY
(2)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
BORV0
R/P-1
(1)
BOREN1
R/P-1
(2)
x = Bit is unknown
BOREN0
R/P-1
DS39977C-page 465
(2)
PWRTEN
R/P-1
bit 0
(2)