PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 47

• Manufacturer Part Number: PIC18F26K80-I/SO
• Description: MCU PIC 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SO

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (0.300", 7.50mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.0
2.1
Getting started with the PIC18F66K80 family family of
8-bit microcontrollers requires attention to a minimal
set of device pin connections before proceeding with
development.
The following pins must always be connected:
• All V
• All AV
• MCLR pin
These pins must also be connected if they are being
used in the end application:
• PGC/PGD pins used for In-Circuit Serial
• OSCI and OSCO pins when an external oscillator
Additionally, the following pins may be required:
• V
The minimum mandatory connections are shown in
Figure
 2011 Microchip Technology Inc.
(see
not the analog device features are used
(see
(see
Programming™ (ICSP™) and debugging purposes
(see
source is used
(see
reference for analog modules is implemented
Note:
REF
DD
2-1.
Section 2.2 “Power Supply
Section 2.2 “Power Supply
Section 2.3 “Master Clear (MCLR)
Section 2.5 “ICSP
Section 2.6 “External Oscillator
+/V
DD
GUIDELINES FOR GETTING
STARTED WITH PIC18FXXKXX
MICROCONTROLLERS
Basic Connection Requirements
and V
REF
and AV
The AV
connected, regardless of whether any of
the analog modules are being used.
- pins are used when external voltage
SS
SS
pins
DD
pins, regardless of whether or
and AV
Pins”)
SS
pins must always be
Pins”)
Pins”)
Pins”)
Pin”)
Preliminary
PIC18F66K80 FAMILY
FIGURE 2-1:
V
Key (all values are recommendations):
C1 through C6: 0.1 F, 20V ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
Note 1:
DD
C6
R1
C1
(1)
R2
MCLR
The example shown is for a PIC18F device
with five V
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
V
V
SS
DD
C5
PIC18FXXKXX
RECOMMENDED
MINIMUM CONNECTIONS
(1)
DD
/V
SS
and AV
V
CAP
C4
C2
/V
DD
DS39977C-page 47
DDCORE
(1)
(1)
/AV
V
V
DD
SS
SS
pairs.
C3
C7
(1)
(1)