PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 529

• Manufacturer Part Number: PIC18F26K80-I/SO
• Description: MCU PIC 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SO

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (0.300", 7.50mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

29.2
In addition to the standard 75 instructions of the PIC18
instruction set, the PIC18F66K80 family of devices also
provides an optional extension to the core CPU func-
tionality. The added features include eight additional
instructions that augment Indirect and Indexed
Addressing operations and the implementation of
Indexed Literal Offset Addressing for many of the
standard PIC18 instructions.
The additional features of the extended instruction set
are enabled by default on unprogrammed devices.
Users must properly set or clear the XINST Configura-
tion bit during programming to enable or disable these
features.
The instructions in the extended set can all be
classified as literal operations, which either manipulate
the File Select Registers, or use them for Indexed
Addressing. Two of the instructions, ADDFSR and
SUBFSR , each have an additional special instantiation
for using FSR2. These versions ( ADDULNK and
SUBULNK ) allow for automatic return after execution.
The extended instructions are specifically implemented
to optimize re-entrant program code (that is, code that
is recursive or that uses a software stack) written in
high-level languages, particularly C. Among other
things, they allow users working in high-level
languages to perform certain operations on data
structures more efficiently. These include:
• Dynamic allocation and deallocation of software
• Function Pointer invocation
• Software Stack Pointer manipulation
• Manipulation of variables located in a software
TABLE 29-3:
 2011 Microchip Technology Inc.
ADDFSR
ADDULNK
CALLW
MOVSF
MOVSS
PUSHL
SUBFSR
SUBULNK
stack space when entering and leaving
subroutines
stack
Mnemonic,
Operands
Extended Instruction Set
f, k
k
z
z
k
f, k
k
s
s
, f
, z
d
EXTENSIONS TO THE PIC18 INSTRUCTION SET
d
Add Literal to FSR
Add Literal to FSR2 and Return
Call Subroutine using WREG
Move z
Move z
Store Literal at FSR2,
Subtract Literal from FSR
Subtract Literal from FSR2 and
Decrement FSR2
return
f
z
d
s
s
d
(destination) 2nd word
(source) to
(source) to
(destination) 2nd word
Description
1st word
1st word
Preliminary
Cycles
PIC18F66K80 FAMILY
1
2
2
2
2
1
1
2
A summary of the instructions in the extended instruc-
tion set is provided in
are provided in
Set”
(page 488) apply to both the standard and extended
PIC18 instruction sets.
29.2.1
Most of the extended instructions use indexed argu-
ments, using one of the File Select Registers and some
offset to specify a source or destination register. When
an argument for an instruction serves as part of
Indexed Addressing, it is enclosed in square brackets
(“[ ]”). This is done to indicate that the argument is used
as an index or offset. The MPASM™ Assembler will
flag an error if it determines that an index or offset value
is not bracketed.
When the extended instruction set is enabled, brackets
are also used to indicate index arguments in
byte-oriented and bit-oriented instructions. This is in
addition to other changes in their syntax. For more
details, see
Syntax with Standard PIC18 Commands”
Note:
Note:
. The opcode field descriptions in
1110
1110
0000
1110
1111
1110
1111
1110
1110
1110
MSb
16-Bit Instruction Word
The instruction set extension and the
Indexed Literal Offset Addressing mode
were designed for optimizing applications
written in C; the user may likely never use
these instructions directly in assembler.
The syntax for these commands is
provided as a reference for users who
may be reviewing code that has been
generated by a compiler.
EXTENDED INSTRUCTION SYNTAX
In the past, square brackets have been
used to denote optional arguments in the
PIC18 and earlier instruction sets. In this
text
arguments are denoted by braces (“{ }”).
Section 29.2.3.1 “Extended Instruction
1000
1000
0000
1011
ffff
1011
xxxx
1010
1001
1001
Section 29.2.2 “Extended Instruction
and
0zzz
ffff
1zzz
xzzz
kkkk
ffkk
11kk
Table
ffkk
11kk
0001
going
29-3. Detailed descriptions
kkkk
kkkk
0100
zzzz
ffff
zzzz
zzzz
kkkk
kkkk
kkkk
LSb
forward,
DS39977C-page 529
Affected
Status
None
None
None
None
None
None
None
None
Table 29-1
.
optional