PIC18F26K80-I/SO Microchip Technology, PIC18F26K80-I/SO Datasheet - Page 75

• Manufacturer Part Number: PIC18F26K80-I/SO
• Description: MCU PIC 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SO

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (0.300", 7.50mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 4-1:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-4
bit 3
bit 2
bit 1
bit 0
Note 1:
U-0
—
Only implemented on devices with 64 pins (PIC18F6XK80, PIC18LF6XK80).
Unimplemented: Read as ‘0’
MODMD: Modulator Output Module Disable bit
1 = The modulator output module is disabled. All Modulator Output registers are held in Reset and
0 = The modulator output module is enabled
ECANMD: Enhanced CAN Module Disable bit
1 = The Enhanced CAN module is disabled. All Enhanced CAN registers are held in Reset and are
0 = The Enhanced CAN module is enabled
CMP2MD: Comparator 2 Module Disable bit
1 = The Comparator 2 module is disabled. All Comparator 2 registers are held in Reset and are not
0 = The Comparator 2 module is enabled
CMP1MD: Comparator 1 Module Disable bit
1 = The Comparator 1 module is disabled. All Comparator 1 registers are held in Reset and are not
0 = The Comparator 1 module is enabled
are not writable.
not writable.
writable.
writable.
U-0
—
PMD2: PERIPHERAL MODULE DISABLE REGISTER 2
W = Writable bit
‘1’ = Bit is set
U-0
—
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F66K80 FAMILY
MODMD
R/W-0
(1)
ECANMD
R/W-0
x = Bit is unknown
CMP2MD
R/W-0
DS39977C-page 75
CMP1MD
R/W-0
bit 0