CPN688 Emerson Network Power, CPN688 Datasheet - Page 17

no-image

CPN688

Manufacturer Part Number
CPN688
Description
CONN N STR CRIMP RG-8,213 COAX
Manufacturer
Emerson Network Power
Series
N Typer
Type
Cable Plugr
Datasheet

Specifications of CPN688

Connector Style
N Type
Connector Type
Plug, Male Pins
Contact Termination
Crimp and Solder
Impedance
50 Ohm
Mounting Type
Free Hanging (In-Line)
Fastening Type
Threaded
Cable Group
RG-8, 213
Frequency - Max
11GHz
Frequency-max
11GHz
Angle
Straight
Application
Commercial
Cable Type
RG-8
Contact Plating
Gold
Finish, Housing
Nickel
Material, Contact
Brass, Beryllium Copper or Phosphor Bronze
Material, Dielectric
TFE/Delrin
Material, Housing
Brass
Mating Type
Threaded
Primary Type
N
Termination
Crimp/Solder
Voltage, Rating
500 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Color
-
Lead Free Status / Rohs Status
RoHS Compliant part
Other names
012446238190
367-1079
CPN-68-8
Type N Straight Plug Solder Style for Semi-Rigid Cable
1. Identify connector parts (2 piece parts) and tools (5 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not nick
3. Place plug contact onto center conductor, insert appropriate sized
4. Insert contact into location fixture and clamp cable in vise. Tighten
5. Solder contact to center conductor through solder hole using .020
6. After solder joint has cooled, loosen stop screw and remove solder
7. Insert contact and cable into plug connector assembly, making
8. Solder connector body to cable jacket, using a minimum amount of
Cable Group
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
RG-401, .250 Semi-Rigid
Tool
Solder Shim
Location Fixture
Cable Vise
Clamp Inserts
Stop Screw
center conductor. Clean all debris from cable.
solder shim between cable jacket and contact.
stop screw until light pressure is applied between contact, solder
shim and cable jacket.
(.051) diameter flux core solder wire. Use a minimum amount of
solder for a good joint.
shim. Remove cable from vise and remove any excess solder from
contact with a sharp blade and clean all debris from contact and
cable.
sure cable jacket bottoms out against internal shoulder of
connector assembly. Insert location fixture into connector
assembly and clamp cable in vise. Tighten stop screw until light
pressure is applied between connector assembly and cable jacket.
solder for a full fillet joint. Allow assembly to cool before removing
connector from vise.
Connectivity....for
Business-Critical Continuity
Part No.
138-4693-001
138-4694-001
138-4696-001
Assembly
138-4693-001
140-0000-984
140-0000-983
140-0000-962
140-0000-964
140-0000-981
“A”
.085 (2.16)
.085 (2.16)
.100 (2.54)
138-4694-001
140-0000-984
140-0000-983
140-0000-962
140-0000-965
140-0000-981
138-4696-001
140-0000-985
140-0000-983
140-0000-962
140-0000-986
140-0000-981
Type N Connectors
17

Related parts for CPN688