CONTACT, PIN, 26-24AWG, CRIMP

030-2410-001

Manufacturer Part Number030-2410-001
DescriptionCONTACT, PIN, 26-24AWG, CRIMP
ManufacturerITT Cannon
030-2410-001 datasheet
 


Specifications of 030-2410-001

Connector TypeContact, CrimpCurrent Rating5A
Contact PlatingGoldContact MaterialCopper
Wire Size (awg)26-24GenderPin
Contact TerminationCrimpContact GenderPin
Rohs CompliantNoFor Use WithZIF Connectors
Lead Free Status / RoHS StatusContains lead / RoHS non-compliant  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (875Kb)Embed
Next
ZIF Connectors
Contacts
T
he Cannon DL Crimp and Buss contacts
are available in addition to the factory
installed Square Post/PCB mount version
contacts. Crimp contacts are available loose or
reeled, where as Buss contacts are available loose
only.
The Buss contacts make the DL series capable of
providing higher than 5 amps per line. The Buss
contacts are pairs of contact lines which increase
the amperage capability in increments of 10 amps
up to 60 amps. The contacts have solder holes at
the tail section for soldering #30-#18 AWG. The
tail is also designed to accommodate a 1/8 crimp
lug for wire sizes larger than #18.
The Crimp contacts are available in two plating
types. The 20 inch gold hermaphroditic version
which is the economical choice for applications
requiring over 100 milliamps to 5 amps. And the
50 inch gold BUMP to FLAT version which offers
the most versatile range of application
requirements from micro-amps to 5 amps.
The BUMP to FLAT version was developed
specifically to handle ‘‘dry circuit’’ requirements
where the signal amperage is not enough to
ensure a clean contact point. The 50 inch gold
BUMP to FLAT version is mandatory for
applications with signals below 100 milliamps.
The Bump contact is installed in the Plug and the
Flat contact is installed in the Receptacle. This
combination increases the contact force and
Materials and Finishes
Description
Crimp Contact*
Buss Contact
*Order crimp contacts separately. See pages 52-53.
50
ensures that the wiping point becomes the current
carrying point after mating. The 50 inch gold
BUMP to FLAT version has become the standard
Material
Copper Alloy
Copper Alloy
Contacts
for all modern applications where power and low
voltage signals are combined into one connector.
Finish
Gold over nickel or Selective gold/tin lead over nickel
Gold over nickel
Dimensions are shown in mm (inch)
Dimensions subject to change

030-2410-001 Summary of contents

  • Page 1

    ZIF Connectors Contacts T he Cannon DL Crimp and Buss contacts are available in addition to the factory installed Square Post/PCB mount version contacts. Crimp contacts are available loose or reeled, where as Buss contacts are available loose only. The ...

  • Page 2

    ... Note: For more information on tools and assembly, see pages 54-59. Wire Termination — Solder 1 Pair Buss Contact Description 1 Pair 2 Pair 3 Pair 4 Pair 5 Pair 6 Pair Wire Termination — Crimp Lug Contacts Part Number 030-7380-001 030-7380-002 030-7380-003 030-7380-004 030-7380-005 030-7380-006 Dimensions are shown in mm (inch) 51 Dimensions subject to change ...

  • Page 3

    ... Flat — — 030-2416-003 030-2494-001 030-2410-003 030-2492-001 030-2409-003 030-2491-001 030-2415-003 030-2493-001 Receptacle (Flat) FLAT CONTACT Contacts Receptacle (Flat) Plug and Hand Receptacle Tool 20 Inch Gold (Page 55) 127000-2207+* 030-2416-001 1 030-2410-001 2 030-2409-001 2 030-2415-001 3 RETENTION LANCE Dimensions are shown in mm (inch) Dimensions subject to change ...

  • Page 4

    ZIF Connectors Crimp Contacts — Reeled Reeled 50 inch gold contacts: Recommended for all applications. Offer the broadest amperage range. Mandatory for low current applications (less than 100 milliamps). Material: Copper Alloy Finish: Gold over nickel Extraction Tool: 274-7029-007 Insertion ...