S29GL256P10TFI010 Spansion Inc., S29GL256P10TFI010 Datasheet - Page 41

IC, FLASH, 256MBIT, 100NS, TSOP-56

S29GL256P10TFI010

Manufacturer Part Number
S29GL256P10TFI010
Description
IC, FLASH, 256MBIT, 100NS, TSOP-56
Manufacturer
Spansion Inc.

Specifications of S29GL256P10TFI010

Memory Type
Flash
Memory Size
256Mbit
Memory Configuration
32M X 8 / 16M X 16
Ic Interface Type
CFI, Parallel
Access Time
100ns
Supply Voltage Range
2.7 To 3.6 V
Memory Case Style
TSOP
Data Bus Width
8 bit, 16 bit
Architecture
Uniform
Interface Type
Page-mode
Supply Voltage (max)
3.6 V
Supply Voltage (min)
2.7 V
Maximum Operating Current
50 mA
Mounting Style
SMD/SMT
Operating Temperature
+ 85 C
Package / Case
TSOP-56
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
S29GL256P10TFI010
Manufacturer:
AD
Quantity:
2 400
Part Number:
S29GL256P10TFI010
Manufacturer:
SPANSION
Quantity:
5 530
Part Number:
S29GL256P10TFI010
Manufacturer:
SPANSION
Quantity:
2 890
Part Number:
S29GL256P10TFI010
Manufacturer:
SAPION
Quantity:
1
Part Number:
S29GL256P10TFI010
Manufacturer:
CYPRESS
Quantity:
910
Part Number:
S29GL256P10TFI010
Manufacturer:
SPANSION
Quantity:
20 000
Part Number:
S29GL256P10TFI010
Manufacturer:
SPANSION/飞索半导体
Quantity:
185
Part Number:
S29GL256P10TFI010
0
Company:
Part Number:
S29GL256P10TFI010
Quantity:
359
Company:
Part Number:
S29GL256P10TFI010
Quantity:
262
November 8, 2007 S29GL-P_00_A7
7.9.3
Software Reset
Software reset is part of the command set (see
read mode and must be used for the following conditions:
Software Functions and Sample Code
Note
Base = Base Address.
The following is a C source code example of using the reset function. Refer to the Spansion Low Level Driver
User’s Guide (available on www.spansion.com) for general information on Spansion Flash memory software
development guidelines.
The following are additional points to consider when using the reset command:
/* Example: Reset (software reset of Flash state machine) */
This command resets the sectors to the read and address bits are ignored.
Reset commands are ignored during program and erase operations.
The reset command may be written between the cycles in a program command sequence before
programming begins (prior to the third cycle). This resets the sector to which the system was writing to the
read mode.
If the program command sequence is written to a sector that is in the Erase Suspend mode, writing the
reset command returns that sector to the erase-suspend-read mode.
The reset command may be written during an Autoselect command sequence.
If a sector has entered the Autoselect mode while in the Erase Suspend mode, writing the reset command
returns that sector to the erase-suspend-read mode.
If DQ1 goes high during a Write Buffer Programming operation, the system must write the “Write to Buffer
Abort Reset” command sequence to RESET the device to reading array data. The standard RESET
command does not work during this condition.
To exit the unlock bypass mode, the system must issue a two-cycle unlock bypass reset command
sequence [see
1. to exit Autoselect mode
2. when DQ5 goes high during write status operation that indicates program or erase cycle was not
3. exit sector lock/unlock operation.
4. to return to erase-suspend-read mode if the device was previously in Erase Suspend mode.
5. after any aborted operations
*( (UINT16 *)base_addr ) = 0x00F0;
successfully completed
Reset Command
D a t a
Cycle
Command Definitions on page 67
S h e e t
S29GL-P MirrorBit
( P r e l i m i n a r y )
Operation
(LLD Function = lld_ResetCmd)
Write
Table 7.18 Reset
®
Table 12.1 on page
Flash Family
for details].
Byte Address
Base + xxxh
68) that also returns the device to array
Word Address
Base + xxxh
00F0h
Data
41

Related parts for S29GL256P10TFI010