S29GL256P10TFI010 Spansion Inc., S29GL256P10TFI010 Datasheet - Page 42

• Manufacturer Part Number: S29GL256P10TFI010
• Description: IC, FLASH, 256MBIT, 100NS, TSOP-56
• Manufacturer: Spansion Inc.

Specifications of S29GL256P10TFI010

• Memory Type: Flash
• Memory Size: 256Mbit
• Memory Configuration: 32M X 8 / 16M X 16
• Ic Interface Type: CFI, Parallel
• Access Time: 100ns
• Supply Voltage Range: 2.7 To 3.6 V
• Memory Case Style: TSOP
• Data Bus Width: 8 bit, 16 bit
• Architecture: Uniform
• Interface Type: Page-mode
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 50 mA
• Mounting Style: SMD/SMT
• Operating Temperature: + 85 C
• Package / Case: TSOP-56
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.
42
3. N = Highest Address Sector.
Hardware Methods
Advanced Sector Protection/Unprotection
WP#/ACC = V
(Highest or Lowest
Sector Locked)
Memory Array
Sector N-2
Sector N-1
The Advanced Sector Protection/Unprotection feature disables or enables programming or erase operations
in any or all sectors and can be implemented through software and/or hardware methods, which are
independent of each other. This section describes the various methods of protecting data stored in the
memory array. An overview of these methods in shown in
Sector N
Sector 0
Sector 1
Sector 2
3
IL
Figure 8.1 Advanced Sector Protection/Unprotection
0 = PPBs Locked
S29GL-P MirrorBit
4. 0 = Sector Protected,
5. PPBs programmed individually,
D a t a
1 = Sector Unprotected.
but cleared collectively
Protection Bit
PPB Lock Bit
Password Method
Persistent
64-bit Password
(One Time Protect)
(PPB)
PPB N-2
PPB N-1
PPB N
PPB 0
PPB 1
PPB 2
S h e e t
(DQ2)
4,5
®
Software Methods
1 = PPBs Unlocked
Flash Family
(One Time Programmable)
1,2,3
Lock Register
( P r e l i m i n a r y )
Figure
Persistent Method
8.1.
6. 0 = Sector Protected,
7. Protect effective only if PPB Lock Bit is
8. Volatile Bits: defaults to user choice upon
(DQ1)
1 = Sector Unprotected.
unlocked and corresponding PPB is “1”
(unprotected).
power-up (see ordering options).
1. Bit is volatile, and defaults to “1” on reset.
2. Programming to “0” locks all PPBs to their
3. Once programmed to “0”, requires hardware
current state.
reset to unlock.
Protection Bit
S29GL-P_00_A7 November 8, 2007
Dynamic
DYB N-2
DYB N-1
(DYB)
DYB N
DYB 0
DYB 1
DYB 2
6,7,8