LM13700N National Semiconductor, LM13700N Datasheet - Page 17

• Manufacturer Part Number: LM13700N
• Description: Operational Amplifier (Op-Amp) IC
• Manufacturer: National Semiconductor

Specifications of LM13700N

• No. Of Amplifiers: 2
• Slew Rate: 50V/µs
• No. Of Pins: 16
• Peak Reflow Compatible (260 C): No
• Input Bias Current: 1µA
• Supply Voltage: 36V
• Output Current: 20mA
• Input Offset Voltage Max: 4mV
• Gain: 2dB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Voltage Controlled Oscillators
Figure 18 shows how to build a VCO using one amplifier when the other
amplifier is needed for another function.
FIGURE 18. Single Amplifier VCO
00798125
FIGURE 17. Sinusoidal VCO
(Continued)
17
Additional Applications
Figure 19 presents an interesting one-shot which draws no
power supply current until it is triggered. A positive-going
trigger pulse of at least 2V amplitude turns on the amplifier
through R
plifier regenerates and latches its output high until capacitor
C charges to the voltage level on the non-inverting input. The
output then switches low, turning off the amplifier and dis-
charging the capacitor. The capacitor discharge rate is
speeded up by shorting the diode bias pin to the inverting
input so that an additional discharge current flows through D
when the amplifier output switches low. A special feature of
this timer is that the other amplifier, when biased from V
can perform another function and draw zero stand-by power
as well.
B
and pulls the non-inverting input high. The am-
00798124
www.national.com
O
,
I