Amplifier IC

MSA-1105-STR

Manufacturer Part NumberMSA-1105-STR
DescriptionAmplifier IC
ManufacturerAvago Technologies US Inc.
MSA-1105-STR datasheet
 


Specifications of MSA-1105-STR

No. Of Amplifiers1No. Of Pins4
Operating Temperature Range-25°C To +85°CPeak Reflow Compatible (260 C)No
Frequency Max1.3GHzNoise Figure Typ3.6dB
Gain12.7dBSupply Voltage Max6.6V
Manufacturer's TypeMMIC AmplifierNumber Of Channels1
Supply Current80mAFrequency (max)1.3GHz
Operating Supply Voltage (min)4.4VOperating Supply Voltage (typ)5.5V
Operating Supply Voltage (max)6.6VPower Dissipation550mW
Package TypeCase 05MountingSurface Mount
Pin Count4Noise Figure (typ)3.6@500MHzdB
Lead Free Status / RoHS StatusContains lead / RoHS non-compliant  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (153Kb)Embed
Next
MSA-1105
Cascadable Silicon Bipolar MMIC Amplifier
Data Sheet
Description
The MSA-1105 is a high performance silicon bipolar
Monolithic Microwave Integrated Circuit (MMIC) housed
in a low cost, surface mount plastic package. This MMIC
is designed for high dynamic range in either 50 or 75 Ω
systems by combining low noise figure with high IP
Typical applications include narrow and broadband linear
amplifiers in commercial and industrial systems.
The MSA-series is fabricated using Avago’s 10 GHz
f
, 25 GHz f
silicon bipolar MMIC process which
T
MAX
uses nitride self-alignment, ion implantation, and
gold metallization to achieve excellent performance,
u niformity and reliability. The use of an external bias
resistor for temperature and current stability also allows
bias flexibility.
05 Plastic Package
Features
High Dynamic Range Cascadable 50Ω or
75Ω Gain Block
3 dB Bandwidth: 50 MHz to 1.3 GHz
• 17.5 dBm Typical P
at 0.5 GHz
.
1 dB
3
• 3.6 dB Typical Noise Figure at 0.5 GHz
• Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
Lead-free Option Available
Typical Biasing Configuration
4
C
block
3
IN
MSA
1
V
d
2
R
bias
V
>
V
8
CC
RFC (Optional)
C
block
OUT
= 5.5 V

MSA-1105-STR Summary of contents

  • Page 1

    ... Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount plastic package. This MMIC is designed for high dynamic range in either Ω systems by combining low noise figure with high IP Typical applications include narrow and broadband linear amplifiers in commercial and industrial systems. The MSA-series is fabricated using Avago’s 10 GHz GHz f silicon bipolar MMIC process which T MAX ...

  • Page 2

    ... Device Voltage d dV/dT Device Voltage Temperature Coefficient Notes: 1. The recommended operating current range for this device mA. Typical performance as a function of current is on the following page. 2. Referenced from 50 MHz gain (GP). Ordering Information Part Numbers No. of Devices MSA-1105-STR 10 MSA-1105-STRG 100 MSA-1105-TR1 500 MSA-1105-TR1G 500 MSA-1105-TR 1500 MSA-1105-TRG 1500 Note: Order part number with a “G” suffix if lead-free option is desired.  [1] Absolute Maximum ...

  • Page 3

    ... MSA-1105 Typical Scattering Parameters (Z Freq GHz Mag Ang .0005 .80 –17 .005 .6 –6 .05 .07 –48 .050 .06 –38 .100 .05 –41 .00 .06 –58 .300 .07 –74 .400 .09 –91 .500 .10 –105 .600 .11 –116 .700 .13 –18 .800 .15 –136 .900 .16 –145 1.000 .18 –15 1.500 .8 174 .000 .38 150 .500 ...

  • Page 4

    Plastic Package Dimensions 4 GROUND 0.030 0.89 RF OUTPUT RF INPUT AND DC BIAS A 1 0.030 ± 0.010 0.76 ± 0.25 (4 PLCS) GROUND 2 0.135 ± 0.015 0.030 3.42 ± 0.25 0.76 (4 PLCS) 0.020 0.050 0.145 ...