TWST-T1 IDEC, TWST-T1 Datasheet

Locking Ring Twist Wrench

TWST-T1

Manufacturer Part Number
TWST-T1
Description
Locking Ring Twist Wrench
Manufacturer
IDEC
Datasheet

Specifications of TWST-T1

For Use With
X Series Emergency Stop Switches
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
Specifications
16, 22 & 30mm X Series E-Stop Switches
Applicable Standards
Operating Temperature
Operating Humidity
Storage Temperature
Operating Force
Minimum Force Required for
Direct Opening Action
Min Operator Stroke Required
for Direct Opening Action
Maximum Operator Stroke
Contact Resistance
Contact Material
Insulation Resistance
Impulse Withstand Voltage
Pollution Degree
Operation Frequency
Shock Resistance
Vibration Resistance
Mechanical Life
Electrical Life
Degree of Protection
Conditional Short-circuit Current
Terminal Style
Recommended Tightening
Torque for Locking Ring
Connectable Wire
Soldering Conditions
Weight
• Plastic bezel, metallic padlock and flush bezel available (XN series)
• Install up to 20 padlocks (XN4E)
• ø29, ø40, ø44 or ø60mm Mushroom heads available
• IDEC’s original “safe break action” ensures that the contacts stay open when
• Safety-lock mechanism (IEC60947-5-5, 6.2)
• 2-in-1: Push-to-lock, Pull/Turn-to-Reset
• Push-ON LED model allows E-Stops to be illuminated only when latched
• Direct Opening Action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)
• Very short panel depth (see chart on next page)
• Degree of protection IP65 (IEC60529)
• RoHS compliant (EU directive 2002/95/EC). Contains no lead, cadmium,
• XN4E series complies with OSHA and ISO 12100-2:2003 standards
the contact block is detached from the operator.
mercury, hexavalent chromium, PBB or PBDE.
Push-to-lock: 10.5N
Pull-to-reset: 10N
Turn-to-reset: 0.16N·m
60N
3 (inside LED unit: 2)
IP65 (IEC60529)
0.88N·m
1.25mm
310 to 350°C, 3 seconds maximum
ø29mm: 23g
ø40mm: 28g
Solder terminal, PC board terminal
2
maximum (16 AWG max)
ø16mm - XA
Non-illuminated: –25 to +60°C (no freezing), Illuminated: –25 to +55°C (no freezing)
100,000 operations minimum, 250,000 operations minimum (24V AC/DC, 100mA)
UL508, CSA C22.2 No. 14
Operating extremes: 10 to 500Hz, amplitude 0.35mm acceleration 50m/s
Operating extremes: 150m/s
Damage limits: 10 to 500Hz, amplitude 0.35mm acceleration 50m/s
IEC60947-5-1, EN60947-5-1, IEC60947-5-5, EN60947-5-5
Push-to-lock: 32N
Pull-to-reset: 21N
Turn-to-reset: 0.27 N·m
2.0 N·m
ø40mm: 72g
ø60mm: 81g
100MΩ minimum (500V DC megger)
ø22mm - XW
45 to 85% RH (no condensation)
50mΩ maximum (initial value)
250,000 operations minimum
900 operations/hour
Gold plated silver
–45 to +80°C
2
(15G), Damage limits: 1000m/s
Terminal: IP20 (when XW9Z-VL2MF is installed)
4.5mm
1000A
2.5kV
4mm
0.75 to 1.25mm
Operator: IP65 (IEC60529)
UL508, UL991, CSA C22.2 No. 14
XN1E, XN5E XN4E
Push-to-lock: 32N Push-to-lock: 32N
Pull-to-reset: 21N Pull-to-reset: N/A
Turn-to-reset: 0.27 N·m Turn-to-reset: 0.4 N·m
2.5 N·m
Plastic bezel: 83g (ø40 mm), 93g (ø60 mm)
Flush bezel: 89g
Padlock type: 20g
M3.0 screw terminal
80N
3
2
(16 AWG max)
ø30mm - XN
2
(100G)
2
2
Specifications con’t on following page

Related parts for TWST-T1

TWST-T1 Summary of contents

Page 1

... X Series E-Stop Switches Features • Plastic bezel, metallic padlock and flush bezel available (XN series) • Install padlocks (XN4E) • ø29, ø40, ø44 or ø60mm Mushroom heads available • IDEC’s original “safe break action” ensures that the contacts stay open when the contact block is detached from the operator. • Safety-lock mechanism (IEC60947-5-5, 6.2) • 2-in-1: Push-to-lock, Pull/Turn-to-Reset • Push-ON LED model allows E-Stops to be illuminated only when latched • Direct Opening Action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K) • ...

Page 2

... Contact Ratings Rated Insulation Voltage (Ui) Rated Current (Ith) Rated Operating Voltage (Ue) Resistive Load (AC-12) AC 50/60 Hz Inductive Load (AC-15) Resistive Load (DC-12) DC Inductive Load (DC-13) Resistive Load (AC-12) AC 50/60 Hz Inductive Load (AC-14) Resistive Load (DC-12) DC Inductive Load (DC-13) • Minimum applicable load: 5V AC/DC, 1mA (reference value). ...

Page 3

... Panel Cut-out Panel Cut-out Gasket 0.5 Push-ON Gasket 0.5 Locking Ring 18.5 47.2 32 48.7 32 48.7 32 ø60mm Operator www.idec.com 800-262-IDEC 1NO-2NC Push-ON TOP TOP ∗3 ∗4 ∗3 ∗4 LED ∗4 ∗3 Terminal Marking Description TOP • Contact Type ∗3 ∗ ...

Page 4

... Panel Cut-out Illuminated 30mm XN4E Illuminated/Push-ON (with terminal cover) +0.2 4.8 0 Panel Cut-out Illuminated Part Number XA9Z-LED2R XA9Z-LED2VR XA9Z-VL2 XW9Z-VL2M XW9Z-VL2MF XN9Z-T1 TWST-T1 XN9Z-HASP421 47.7 33 Locking Ring Rubber Gasket M3 Terminal Push-ON Screws Terminal Cover Panel Thickness XW9Z-VL2M 60.4 21 Locking Ring Rubber Gasket ...

Related keywords