57HS22-02-2-06N Grayhill Inc, 57HS22-02-2-06N Datasheet

no-image

57HS22-02-2-06N

Manufacturer Part Number
57HS22-02-2-06N
Description
57HS22-02-2-06N /panel Seal, 22.5&deg
Manufacturer
Grayhill Inc
Datasheet

Specifications of 57HS22-02-2-06N

Total # Of Positions
6
Pole Throw Configuration
DP
Actuator Style
Shaft
Actuator Material
Stainless Steel
Current Rating (max)
0.25A
Illumination Type
Not Required
Ac Voltage Rating (max)
115VVAC
Dc Voltage Rating (max)
30VVDC
Mechanical Life
10000
Contact Material
Silver Alloy
Contact Plating
Gold
Product Height (mm)
53.92mm
Product Depth (mm)
28.58mm
Product Length (mm)
28.58mm
Terminal Type
Solder Lug
Lead Free Status / Rohs Status
Compliant
FEATURES
• Smallest Diameter Rotary Switch
• Military Qualified MIL-DTL-3786/36
• Gold-plated Contact System
DIMENSIONS
SERIES 53, 57 and 59
1.125" Diameter, 1/4 Amp
Rotary
STANDARD STYLE
MILITARY QUALIFIED
The Series 53, 57 and 59 rotary switches are all
military type switches. Grayhill manufactures
these switches in two styles: M and HS. Style M
is unsealed and is not qualified; Style HS is shaft
and panel sealed and is qualified. The non-
qualified Style M can be regarded as our
Standard Style for types of switches. Although
it is not qualified, Style M is constructed of the
same military grade materials and will provide
comparable performance in all areas. For
example, the Style ‘M’ switches, in addition to
the electrical ratings listed elsewhere in these
pages, will meet the following requirements of
MIL-DTL-3786:
Moisture Resistance: Medium and High Shock;
Vibration (10 to 500 cps); Thermal Shock (-65
°C to 125 °C); Salt Spray; Explosion; Terminal
Strength (pull, 2 lbs. minimum); and Stop
Strength (15 pound-inches minimum).
Military Style
with this Number of Positions and
Current Capacity
Compatible with Logic Circuitry
32
Mounting Hardware: Two mounting nuts, .094" (2,39) thick by .562" (14,27) across flats, one internal tooth lockwasher
and one non-turn washer (see detail D for dimensions), are supplied with switch.
Grayhill part number and date code marked on detent cover label. Customer part number marked on request. Military
part number marked when required.
No. of
Decks
1
2
3
4
5
6
(5.56 ± 0,10)
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
.219 ± .004
1.125 ± .010 (28,58 ± 0,25)
Ser. 53—1.281 (32,54)
1.249 (31,72)
1.582 (40,18)
1.915 (48,64)
2.248 (57,10)
2.831 (71,91)
Ser. 57 & 59—
Dimension
.916 (23,27)
In inches (and millimeters)
A
C
L
SEE
CIRCUIT
DIAGRAM
Multi-Deck Rotary Switches
Dimension
.032 (0,81)
.032 (0,81)
.032 (0,81)
.032 (0,81)
.032 (0,81)
.281 (7,14)
B
C
C
L
L
45°
OF POSITION
NO. 1
OF BUSHING
KEYWAY
C L
Approx.
Weight
Grams
100
50
60
70
80
90
.250 ± .020
(6,35 ± 0,51)
The line drawings shown above are applicable
to the Style M and Style HS. The only difference
between the two is the length of the tab of the
non-turn washer. The shorter tab for the HS is
explained in the following paragraph.
The Series 53, 57 and 59 Style HS rotary
switches are qualified to MIL-DTL-3786/36. The
Style HS is shaft and panel sealed. The panel is
sealed by an O-ring at the base of the bushing.
The shaft is sealed by an O-ring inside the
bushing. These seals do not alter the dimensions
shown in the line drawings when the switch is
mounted.
A non-turn washer, supplied with the mounting
hardware, may be used with the Style HS
switches. It is suggested that the non-turn washer
be mounted in the following manner to preserve
the seal: from the front of the panel into a hole
that does not go through the panel.
BUSHING KEYWAY
.066 ± .002 (1,68 ± 0,05) WIDE
BY .036 ± .003 (0,91 ± 0,08)
DEEP FROM A .375 (9,53) DIA.
Decks
No. of
10
11
12
7
8
9
.250 + .001
–.002 DIA.
(6,35 + 0,03
–0,05)
3.164 (80,37)
3.497 (88,82)
3.830 (97,28)
4.163 (105,74)
4.496 (114,20)
4.829 (122,66)
Dimension
.437
±.020
(11,10
±0,51)
A
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
.437
±.020
(11,10
±0,51)
Dimension
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
.281 (7,14)
B
DIM. A
INTEGRAL ASSEMBLY NUT. DO NOT REMOVE.
3/8-32 UNEF-2A THREAD
MILITARY NUMBERS MARKED HERE
Approx.
Weight
Grams
+ .046 (1,17)
– .020 (0,51)
110
120
130
140
150
160
The qualification of the Series 53, 57 and 59
rotary switches does not extend to all possible
combinations listed in the Choices and
Limitations chart. The limitations on the
qualification are described in the chart shown
below.
Standard variations, such as shaft and/or
bushing length, etc., that do not affect switch
performance can also be marked as qualified
product. For complete details contact Grayhill.
Military qualified Series 53, 57 and 59 Style HS
rotary switches may be ordered by the ‘M’
number listed in MIL-DTL-3786/36 or by the
Grayhill part number. Military style switches
will be marked to the specification.
Qualified for the Following Characteristics
Series
Style HS Switches are MIL-DTL-3786/36
53
57
59
1.000 (25.4) SER. 57 & 59
Non-Turn Washer Detail D
STYLE M—.187 (4,75)
STYLE HS—.125 (3,18)
± .010 (0,25)
1.156 (29.36) SER. 53
DIM. B REF. STUD
PROJECTION
Max. No.
of Decks
± .010 (0,25)
5
5
5
Poles/Deck
.375 ± .005
(9,53 ± 0,13)
Max. No.
.125
± .003
(3,18
± 0,08)
8
4
5
Rear views
shown with circuit
diagrams
Total Poles/Switch
.032 ± .003
(0,81 ± 0,08)
Max. No.
24
20
20

Related parts for 57HS22-02-2-06N

57HS22-02-2-06N Summary of contents

Page 1

... MILITARY QUALIFIED The Series 53, 57 and 59 rotary switches are all military type switches. Grayhill manufactures these switches in two styles: M and HS. Style M is unsealed and is not qualified; Style HS is shaft and panel sealed and is qualified. The non- qualified Style M can be regarded as our Standard Style for types of switches ...

Page 2

... Rear View 15 1.190 ± .015 16 (30,23 ± 0,38) 17 OVER TERMINALS SEE L DETAIL ILLINOIS GRANGE LA GRAYHILL SEE NOTE Note: Common location for a single pole per deck switch. For common location on multipole switches see circuit diagrams. Rotary 33 ...

Page 3

... Insulation Resistance: 1,000 megohms minimum between mutually insulated parts. Voltage Breakdown: 500 Vac minimum between mutually insulated parts. These switches will carry 4 amperes with a maximum contact temperature rise of 20°C. If the life limiting characteristics are less critical than those shown above or if elevated temperatures or reduced pressures are involved, Grayhill can predict the switch life for the application ...

Page 4

... ORDERING INFORMATION 57M22–01–1–16N–F * All rotary switches that are required to have military designated markings and testing adhering to MIL-DTL-3786 are to be ordered by specifying the military part number identified on the appropriate slash sheet. Available from your local Grayhill Distributor Grayhill, Inc. • ...

Related keywords