QS18EP6D BANNER ENGINEERING, QS18EP6D Datasheet - Page 8

• Manufacturer Part Number: QS18EP6D
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of QS18EP6D

• Output Current: 100mA
• Sensor Output: PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Body Material: ABS
• Supply Voltage Max: 30VDC
• Sensing Range Max: 800mm
• Contact Current Max: 35mA
• Sensing Mode: Diffuse
• Sensor Body Material: ABS

WORLD-BEAM
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
P/N 136564 rev. A
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
10 to 30V dc (10% max. ripple) at less than 35 mA, exclusive of load
10 to 24V dc at > 55° C
Protected against reverse polarity and transient voltages
Current sourcing (PNP) or current sinking (NPN), depending on model.
Light- or dark-operate selectable (see page 5).
Selectable 30 ms output OFF-delay (see page 5).
100 mA max.
OFF-state leakage current: less than 50µA @ 30V dc
ON-state saturation voltage: less than 1.5V (1.7V for 30' cable models)
Protected against false pulse on power-up and continuous overload or short-
circuit of output
600 µs ON/OFF
NOTE: M omentary delay on power-up; output does not con d uct during this
SMB312S
• 2-axis, side-mounting bracket
• Stainless steel
SMBQS18Y
• Die-cast bracket mounts into 18 mm holes
• A ccommodates Euro-style QD connections
SMB4050YL
• H eavy-duty die-cast bracket designed for industrial
• Replaceable window
• M18 vertical mount option
• Includes nuts and lock washer
protection
time.
For bracket dimensions, visit www.bannerengineering.com.
®
QS18E Series
See the Accessories section of your current Banner Sensors catalog
or visit www.bannerengineering.com for complete information.
Accessory Reflectors and Fiber Optics
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year.
Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be
defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.
Accessory Mounting Brackets
Specifications
Repeatability
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
• I f the push button does not appear to be responsive, perform the push button
• T o maintain backwards compatibility with earlier models, 3 remote line pulses
75 µs
ABS housing, PMMA lens
Meets NEMA 6; IEC IP67; UL Type 1
PVC-jacketed 4-conductor 2 m (6.5') or 9 m (30') unterminated cable, or
4-pin Euro-style or 4-pin Pico-style quick-disconnect (QD), either integral or
150 mm (6") pigtail, are avail a ble. QD cordsets are ordered separately
(page 7).
Temperature: –20° to +70°C (–4° to +158°F)
Max. rel. humidity: 90% at 50°C (non-condensing)
SMBQS18DIN
• 2-piece bracket mounts to 35 mm DIN rail
• 3 00 series stainless steel and glass-filled nylon; zinc-
SMB18A
• R ight-angle bracket with curved mounting slot for
• 12-ga. stainless steel
• Clearance for M4 (#8) hardware
SMB3018SC
• 18 mm swivel barrel for side mount bracket
• Black reinforced thermoplastic polyester
• Stainless steel swivel locking hardware included
Additional available brackets:
SMB46A, SMB18SF, SMBQS18RA, SMB18FA, SMBQS18A
or a push button hold followed by 3 push button clicks will perform a Dark SET.
enable procedure (page 2).
plated steel screw
versatile orientation