Photoelectric Sensor

QS30FF200Q

Manufacturer Part NumberQS30FF200Q
DescriptionPhotoelectric Sensor
ManufacturerBANNER ENGINEERING
QS30FF200Q datasheet
 


Specifications of QS30FF200Q

Output Current100mASensor OutputNPN/PNP
Supply Voltage Range Dc10V To 30VSensor HousingRectangular
Sensor InputOpticalBody MaterialABS
Supply Voltage Max30VDCSensing Range Max200mm
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
Page 1/10

Download datasheet (828Kb)Embed
Next
Sensing Mode
Model*
875 nm Infrared
QS30E
emitter
Effective Beam:
18 mm (0.7")
QS30R
receiver
630 nm Visible Red
QS30LP
P
630 nm Visible Red
QS30LV
*
Only standard 2 m (6.5') cable models are listed. For 9 m (30') integral cable, add suffix “W/30” to the model number (e.g., QS30E W/30).
QD models: For 5-pin integral Euro-style QD, add suffix “Q” (e.g., QS30EQ).
Range is specified using a model BRT-84 retroreflector.
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Printed in USA
®
WORLD-BEAM
QS30 – DC Voltage
Compact, self-contained photoelectric sensors in universal-style housing
• Advanced one-piece photoelectric sensors with exceptional long-range optical
performance
• Compact housing with mounting versatility, via its popular 30 mm threaded barrel
or side-mount holes
• 10 to 30V dc operation with bipolar discrete outputs, NPN and PNP
• Selectable Light or Dark Operate, depending on hookup
• Tough ABS/polycarbonate blend housing is rated to IEC IP67; NEMA 6
• Easy-to-see sensor status indicators: two status LEDs visible from 360°; extra-large
Output indicator on back of sensor housing (except emitters) visible from long
distance
• Opposed, retroreflective, polarized retroreflective, diffuse and fixed-field (200, 400,
or 600 mm cutoff) models available
• Retroreflective, polarized retroreflective, and diffuse models have potentiometer on
back of housing for easy sensor range adjustment
• Choose 2 m integral cable or Euro-style integral QD models
Models
Range
Output
Sensing Mode
940 nm Infrared
60 m (200')
680 nm Visible Red
8 m (26')
Bipolar
NPN/PNP
12 m (40')
11/05
Features
Model*
Range
Output
QS30D
1 m (3.3')
QS30FF200
200 mm (8")
NPN/PNP
400 mm
QS30FF400
(16")
600 mm
QS30FF600
(24")
P/N 119165 rev. A
Bipolar

QS30FF200Q Summary of contents

  • Page 1

    Sensing Mode Model* 875 nm Infrared QS30E emitter Effective Beam (0.7") QS30R receiver 630 nm Visible Red QS30LP P 630 nm Visible Red QS30LV * Only standard 2 m (6.5') cable models are listed. For 9 m (30') ...

  • Page 2

    ... R2 Figure 1. Fixed-field concept Sensing Axis general rule, the most reliable sensing of an object approaching from the side occurs when the line of approach is parallel to the sensing axis. Figure 2. Fixed-field sensing axis Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 or ...

  • Page 3

    ... Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 WORLD-BEAM Color Sensitivity The effects of object reflectivity on cutoff distance, though small, may be important for some applications expected that at any given cutoff setting, the actual cutoff distance for lower reflectance targets will be slightly shorter than for higher reflectance targets ...

  • Page 4

    ... QS30LV Model Certifications Approvals in process 4 P/N 119165 rev. A Specifications PNP: less than 10 µA PNP: less than 2.0V @ 100 mA Yellow ON steady: Light sensed Yellow flashing: Marginal excess gain Banner Engineering Corp. www.bannerengineering.com • Tel: 763.544.3164 (1.0 to 1.5x excess gain) Minneapolis, MN U.S.A. • ...

  • Page 5

    ... Excess Gain †† Performance based on use of the specified retroreflector. ††† Performance based on use of a 90% reflectance white test card. Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 WORLD-BEAM Performance Curves Beam Pattern Performance based on use of a 90% reflectance white test card. ...

  • Page 6

    ... Other QD Models 30V dc bu – wh Load bk Load gy LO/DO Select Pin-Out ø (0.6") M12 x 1 Brown Wire Black Wire 38 mm max. (1.5") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 Yellow LED Output Indicator White Wire Blue Wire Gray Wire ...

  • Page 7

    ... X Ø 3.3 mm (0.28") (0.13" (1.30") (2.20") 18.0 mm (0.71") 16.35 mm (0.64") 13.3 mm 24.0 mm (0.94") 35.0 mm (1.38") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 WORLD-BEAM Accessory Brackets SMBQS30LT 4.5mm [0.18"] 24.0mm [0.95"] 33.0mm [1.3"] 59.4mm [2.4"] 24° SMBQS30YL 13.8 mm (0.54" ...

  • Page 8

    ... Clearance for M6 (1/4") hardware 6.4 mm 25.4 mm (0.25") (1.00") ø 30.15 mm (1.187" dia.) 25.4 mm (1.00") 57.0 mm (2.25") 34.9 mm (1.38") 25.4 mm ø 5.1 mm (1.00") (0.20" dia.) 35.1 mm 57.2 mm (1.38") (2.25") 69.9 mm (2.75") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...

  • Page 9

    ... Aperture model APQS30-040V shown Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 WORLD-BEAM Opposed-mode QS30 sensors may be fitted with apertures to narrow or shape the sensor’s effective beam to more closely match the size or profile of the objects being sensed. A common example is the use of “line” (or “slot”) type apertures to sense thread ...

  • Page 10

    ... NOTE: Polarized sensors require corner cube type retroreflective targets only. P/N 119165 rev. A Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com Retroreflective Targets WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year ...