S183E BANNER ENGINEERING, S183E Datasheet - Page 23

• Manufacturer Part Number: S183E
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of S183E

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 300mA
• Switch Terminals: Cable
• Sensor Housing: Barrel
• Sensor Input: Optical
• Sensing Range Max: 20m
• Sensing Mode: Opposed
• Brand/series: S18
• Current, Switching: 300 mA
• Humidity: 90% @ 50 °C (Non-Condensing)
• Ip Rating: IP69K
• Length, Cable: 6.5 ft.
• Material, Housing: PBT Polyester
• Material, Lens: Polycarbonate⁄Acrylic
• Output: SPST
• Primary Type: Photoelectric
• Range, Measurement: 66 mm
• Response Time: 16 ms (ON), 8 ms (OFF)
• Standards: CE Mark, CSA Certified, UL Listed
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: Cable
• Vibration: 10 to 60 Hz (Max.)
• Voltage, Supply: 250 VAC
• Lead Free Status / Rohs Status: RoHS Exempt Product

Supply Voltage
Output
Output Response Time
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Design Standards
Certifications
Hookup Diagrams
CSA:
FM:
KEMA:
ETL:
5 to 15V dc (provided by the amplifier to which the sensor is connected)
Constant current output: ≤ 1.2 mA in the “dark” condition and ≤ 2.1 mA in the “light” condition
Opposed mode receiver: 2 milliseconds on/400 microseconds off
All other models: 5 milliseconds on/off (does not include amplifier response)
15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel); located
on rear panel and protected by a clear gasketed acrylic cover
Red LED Alignment Indicator Device (AID) located on rear panel lights when the sensor sees a “light” condition;
pulse rate is proportional to signal strength (the stronger the signal, the faster the pulse rate).
Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses, and stainless steel screws
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12 and 13; IEC IP67
PVC-jacketed 2-conductor 2 m or 9 m cables, or special 4-pin Euro-style quick-disconnect (QD) fitting are available;
QD cables are ordered separately. See page 381.
Temperature: -40° to +70° C
MIAD9 Series sensors comply with the following standards:
DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 and 3611, CSA 22.2 #157-92
and 22.2 #213-M1987
SP02 (p. 489)
MINI-BEAM
#LR 41887
#J.I. 5Y3A4.AX
#03ATEX1441X
#553868
®
NAMUR Specifications
Instrinsically Safe, with Entity for
Class I, Groups A-D
Class I, Div. 2, Groups A-D
Intrinsically Safe, with Entity for
Class I, II, III, Div. 1, Groups A-G
Class I, II, III, Div. 2, Groups A-D and G
II IG EEx ia IIC T6
APPROVALS
More information online at
Relative humidity: 90% at 50° C (non-condensing)
MINI-BEAM
bannerengineering.com
®
NAMUR Series
Compact Sensors
87