S183E BANNER ENGINEERING, S183E Datasheet - Page 42

• Manufacturer Part Number: S183E
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of S183E

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 300mA
• Switch Terminals: Cable
• Sensor Housing: Barrel
• Sensor Input: Optical
• Sensing Range Max: 20m
• Sensing Mode: Opposed
• Brand/series: S18
• Current, Switching: 300 mA
• Humidity: 90% @ 50 °C (Non-Condensing)
• Ip Rating: IP69K
• Length, Cable: 6.5 ft.
• Material, Housing: PBT Polyester
• Material, Lens: Polycarbonate⁄Acrylic
• Output: SPST
• Primary Type: Photoelectric
• Range, Measurement: 66 mm
• Response Time: 16 ms (ON), 8 ms (OFF)
• Standards: CE Mark, CSA Certified, UL Listed
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: Cable
• Vibration: 10 to 60 Hz (Max.)
• Voltage, Supply: 250 VAC
• Lead Free Status / Rohs Status: RoHS Exempt Product

106
Q25 Series
Compact Sensors
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Vibration and
Mechanical Shock
Certifications
Hookup Diagrams
More information online at
20 to 250V ac (50/60 Hz). Average current 20 mA. Peak current: 200 mA at 20V ac, 500 mA at 120V ac, 750 mA at 250V ac
Protected against transient voltages
SPST solid-state ac switch; three-wire hookup; Choose Light Operate (LO) or Dark Operate (DO), depending on model.
Light operate: Output conducts when the sensor sees its own (or the emitter’s) modulated light
Dark operate: Output conducts when sensor sees dark
300 mA max. (continuous) Fixed-field models: derate 5 mA/° C above +50° C;
Inrush capability: 1 amp for 20 milliseconds, non-repetitive
Off-state leakage current: less than 100 mA
On-state voltage drop: 3V at 300 mA ac; 2V at 15 mA ac
Protected against false pulse on power-up
Opposed Mode: 16 milliseconds ON, 8 milliseconds OFF
Polarized Retroreflective and Fixed-field: 16 milliseconds ON/OFF
NOTE: 100 millisecond delay on power-up
Opposed Mode: 2 milliseconds; Polarized Retroreflective and Fixed-field: 4 milliseconds.
Repeatability and response are independent of signal strength.
Two LEDs: Green and Yellow
Housings are thermoplastic polyester. Lenses are polycarbonate or acrylic; one jam nut included.
Leakproof design rated NEMA 6P, DIN 40050 (IP69K)
2 m or 9 m attached cable, or 4 pin Micro-style quick-disconnect fitting. QD cables are ordered separately. See page 386.
Temperature: -40° to +70° C
All models meet Mil. Std. 202F requirements. Method 201A (Vibration; frequency 10 to 60 Hz, max, double amplitude
0.06-inch acceleration 10G). Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation)
Cabled Emitters: AC03 (p. 484)
QD Emitters: AC07 (p. 485)
bannerengineering.com
Green ON steady: power to sensor is ON
Yellow ON steady: sensor sees light
Yellow flashing: excess gain marginal (1-1.5x) in light condition
Q25 AC Specifications
R
Relative humidity: 90% at 50° C (non-condensing)
Other Cabled Models: AC05 (p. 485)
Other QD Models: AC06 (p. 485)