S183E BANNER ENGINEERING, S183E Datasheet - Page 7

• Manufacturer Part Number: S183E
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of S183E

• Output Current: 150mA
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 300mA
• Switch Terminals: Cable
• Sensor Housing: Barrel
• Sensor Input: Optical
• Sensing Range Max: 20m
• Sensing Mode: Opposed
• Brand/series: S18
• Current, Switching: 300 mA
• Humidity: 90% @ 50 °C (Non-Condensing)
• Ip Rating: IP69K
• Length, Cable: 6.5 ft.
• Material, Housing: PBT Polyester
• Material, Lens: Polycarbonate⁄Acrylic
• Output: SPST
• Primary Type: Photoelectric
• Range, Measurement: 66 mm
• Response Time: 16 ms (ON), 8 ms (OFF)
• Standards: CE Mark, CSA Certified, UL Listed
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: Cable
• Vibration: 10 to 60 Hz (Max.)
• Voltage, Supply: 250 VAC
• Lead Free Status / Rohs Status: RoHS Exempt Product

* Does not apply to laser emitter models.
Sensing Hysteresis*
Adjustments*
Indicators
Construction
Connections
Operating Conditions
Laser Classification
(Laser models only)
Certifications
Hookup Diagrams
Class 1 Laser Sensors
Lasers that are safe under reasonably foreseeable
conditions of operation, including the use of optical
instruments for intrabeam viewing.
Reference 60825-1 Amend. 2 © IEC:2001(E),
section 8.2.
For safe laser use:
• Do not permit a person to stare at the laser from within
• Do not point the laser at a person’s eye at close range.
• Locate open laser beam paths either above or below eye
the beam.
level, where practical.
WORLD-BEAM
Retroreflective Laser models: 12% of range typical
Diffuse Laser models: 15% of range typical
Adjustable-field models: 0.5% of range typical at 20 mm cutoff
Adjustable-field Laser models: 1% range typical at 30 mm cutoff
Retroreflective, Retroreflective Laser, Convergent, Diffuse, Diffuse Laser and Glass Fiber Optic, Plastic
Fiber Optic models: Single-turn sensitivity (Gain) adjustment potentiometer
Adjustable-field models: five-turn adjustment screw sets cutoff distance between 20 and 100 mm (adjustable-field)
or 30 and 150 mm (laser adjustable-field), clutched at both ends of travel
Laser Emitter models: Green LED: Power applied
All other models, 2 LED indicators:
†
ABS housing, rated IEC IP67; NEMA 6; acrylic lens cover (Laser Emitter models have PMMA window)
2.5 mm (adjustable-field only) and 3 mm mounting hardware included
2 m or 9 m 4-wire PVC cable, or 4-pin 150 mm pigtail Pico-style QD (Q), or 4-pin 150 mm pigtail Euro-style QD (Q5),
or 4-pin Integral Pico-style QD (Q7), or 4-pin Integral Euro-style QD (Q8), depending on model. See pages 378 and 380.
Temperature:
Relative humidity: 90% @ 50° C (non-condensing)
Class 1 laser product; complies with EN60825-1: 2001 and 21 CFR 1040.10, except deviations persuant to Laser
Notice 50, dated 7-26-01.
Laser models:
Emitters: DC03 (p. 476)
Laser Emitter Models: SP01 (p. 489)
WORLD-BEAM
NOTE: Prior to date code 0223, the output indicator was red instead of yellow.
Green ON steady: Power ON
Green flashing: Output overloaded
Yellow
Yellow
†
†
ON steady: Light sensed
flashing: Marginal excess gain (1.0 to 1.5x excess gain) in the light condition
Laser models
-10° to +50° C
®
All other models:
QS18 Specifications (cont’d)
1% of range typical at 50 mm cutoff
3% of range typical at 100 mm cutoff
®
NPN Models: DC04 (p.476)
2% range typical at 75 mm cutoff
5% range typical at 150 mm cutoff
QS18 Specifications
More information online at
Adjustable-field
0° to +55° C
-20° to +70° C
All others
WORLD-BEAM
PNP Models: DC05 (p. 477)
bannerengineering.com
Compact Sensors
®
QS18 Series
71