S18SN6FF50Q BANNER ENGINEERING, S18SN6FF50Q Datasheet - Page 6

• Manufacturer Part Number: S18SN6FF50Q
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Fixed Fieldr

Specifications of S18SN6FF50Q

• Output Current: 150mA
• Sensor Output: NPN
• Supply Voltage Range Dc: 10V To 30V
• Sensing Range Max: 25mm
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Sensor Input: Laser
• Primary Type: Photoelectric

70
Compact Sensors
WORLD-BEAM
*
** For 9 m cable, add suffix W/30 to the 2 m model number (example, QS18VN6F W/30). A model with a QD requires a mating cable (see pages 378 and 380).
* Does not apply to laser emitter models.
WORLD-BEAM
QS18VN6F
QS18VN6FQ8
QS18VP6F
QS18VP6FQ8
QS18VN6FP
QS18VN6FPQ8
QS18VP6FP
QS18VP6FPQ8
QD models:
• For 4-pin integral Euro-style QD, add suffix Q8 (example, QS18VN6FQ8).
• For 4-pin integral Pico-style QD, add suffix Q7 (example, QS18VN6FQ7).
Supply Voltage
Laser Characteristics
(Lasers only)
Supply Protection Circuitry
Laser Control
Output Configuration*
Output Response Time*
Delay at Power-up
Repeatability*
More information online at
Models
Infrared LED
®
QS18 Series
PLASTIC FIBER
GLASS FIBER
Mode/LED*
Sensing
®
Visible Red LED
QS18, 10-30V dc
Retroreflective, Diffuse and Adjustable-field Laser models: 10 to 30V dc (10% max. ripple) at less than
15 mA, exclusive of load
Laser Emitter models: 10 to 30V dc (10% max. ripple) at less than 35 mA, exclusive of load
All other models: 10 to 30V dc (10% max. ripple) at less than 25 mA, exclusive of load
Wavelength: 650 nm visible red Class 1 laser
Pulse width: 7 microseconds (Laser Emitter models: 5 microseconds)
Rep rate: 130 microseconds (Laser Emitter models: 27 microseconds)
Pulse output power: 0.065 mW (Laser Emitter models: less than 1.9 mW)
Protected against reverse polarity and transient voltages
Enable beam by applying 0V dc to white wire; apply +10 to 30V dc to white wire to inhibit (extinguish) beam
Solid-state complementary (SPDT); NPN (current sinking) or PNP (current sourcing), depending on model;
Rating: 100 mA max. each output at 25° C
OFF-state leakage current:
ON-state saturation voltage:
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Opposed models: 750 microseconds ON; 375 microseconds OFF
Retroreflective Laser, Diffuse Laser and Adjustable-field models: 700 microseconds ON/OFF
Fixed-field models: 850 microseconds ON/OFF
All others models: 600 microseconds ON/OFF
Laser Emitters: 1.5 seconds
Retroreflective, Diffuse and Adjustable-field Laser models: 200 milliseconds; outputs do not conduct during
this time.
All others: 100 milliseconds; outputs do not conduct during this time.
Opposed models: 100 microseconds
Retroreflective and Diffuse Laser models: 130 microseconds
Adjustable-field models: 175 microseconds
Fixed-field models: 160 microseconds
All other models: 150 microseconds
WORLD-BEAM
bannerengineering.com
Retroreflective, Diffuse and Adjustable-field Laser models: NPN: less than 200 µA @ 30V dc
Fixed-field models: less than 200 µA @ 30V dc
All others: less than 50 µA @ 30V dc
Retroreflective, Diffuse and Adjustable-field Laser models: NPN: less than 1.6V @ 100 mA
All other models: less than 1V @ 10 mA; less than 1.5V @ 100 mA
Range varies
Range varies
fiber optics
fiber optics
by sensing
by sensing
mode and
mode and
Range
used
used
4-pin Euro QD
4-pin Euro QD
4-pin Euro QD
4-pin Euro QD
®
(cont’d)
Cable**
QS18 Specifications
2 m
2 m
2 m
2 m
• For 4-pin 150 mm Euro-style pigtail, add suffix Q5 (example, QS18VN6FQ5).
• For 4-pin 150 mm Pico-style pigtail, add suffix Q (example, QS18VN6FQ).
Output
Type
NPN
NPN
PNP
PNP
PNP: less than 10 µA @ 30V dc
PNP: less than 2.0V @ 100 mA
& EGCG-2
& EGCP-2
(p. 444)
(p. 447)
Excess
EGCG-1
EGCP-1
Gain
& BPG-2
Pattern
(p. 462)
(p. 465)
BPP-1 &
Beam
BPG-1
BPP-2
Sheet
63908
63908
Data
Download
PDF