6101-0016 HERGA, 6101-0016 Datasheet

PRESSURE SWITCH, MPL808, 10PSI

6101-0016

Manufacturer Part Number
6101-0016
Description
PRESSURE SWITCH, MPL808, 10PSI
Manufacturer
HERGA
Series
6101r
Datasheet

Specifications of 6101-0016

Connection Size
0.125"
Contact Current Ac Max
5A
Contact Voltage Ac Max
250V
Operating Pressure Range
0.7 To 16bar
Operating instructions
Electrical connections by 250 (1/4”) push-on connectors.
The switch is factory set to operate within +/- 1 PSI at 10 PSI on rising
pressure.
Pressure connection
1/8” NPT base entry.
Pressure range
Four springs are supplied with the switch, colour coded and offering the
following ranges:
*INSTALLED SPRING
*
compression spring, acting against the force of the diaphragm. Media
pressure acting against the diaphragm causes the pressure disc to push up
against the operator button of the microswitch. The disc has a stop to prevent
overtravel of the operator button of the microswitch.
“deadband” or “hysterisis” which most designers utilise in their logic circuit.
electrical supply from the microswitch and pressure hose from the pressure
port.
adjustment screw and withdraw only the operating spring from the body. If
the operating pin is also removed, replace it before replacing the spring.
Select the new spring and insert into the switch and replace the adjustment
screw.
fitted as standard
6101-0016
Adjustment of the setpoint is provided by an adjustment screw and
Because of the snap action, of the microswitch, the switches do have a
Before attempting to change the pressure spring, disconnect the
To change the pressure range spring, unscrew the pressure
1 – Common
2 – N.C. opens on pressure rise
3 – N.O. closes on pressure rise
DARK BLUE
YELLOW
RED
Instruction Leaflet
Farnell
10-40 PSI
30-125 PSI
60-170 PSI
125-250 PSI
Farnell Ref: 427-6577
49-0002-A-00
SPRING KIT

Related parts for 6101-0016

6101-0016 Summary of contents

Page 1

... Operating instructions Electrical connections by 250 (1/4”) push-on connectors. 1 – Common 2 – N.C. opens on pressure rise 3 – N.O. closes on pressure rise The switch is factory set to operate within +/- 1 PSI at 10 PSI on rising pressure. Pressure connection 1/8” NPT base entry. Pressure range ...

Page 2

... Technical specification Pressure range: Electrical: Contact Rating Fluid Medium Burst pressure Mechanical Life Operating temp Contacts Diaphragm Case material Weight 10-250 PSI (using four springs) SPDT(N/O or N/C) 5 Amp, 250Vac Wide range of media 500 psig 6 1.0x10 cycles - Silver alloy Polyurethane Die Cast Housing ...

Related keywords