Ultrasonic Sensor

S18UBAQ

Manufacturer Part NumberS18UBAQ
DescriptionUltrasonic Sensor
ManufacturerBANNER ENGINEERING
TypeUltrasonic
S18UBAQ datasheets
 


Specifications of S18UBAQ

Sensing Range Min30mmSensing Range Max300mm
Switching Frequency300kHzExternal Diameter18mm
Operating Temperature Range-20°C To +60°CSupply Voltage30VDC
Frequency300kHzBody StyleCylindrical
Brand/seriesS18UCurrent, Switching100 mA
FunctionProximityIp RatingIP67
Mounting TypeThreadedOutputNPN/PNP, SPST
Primary TypeProximityRange, Measurement300 mm
TechnologyUltrasonicTermination5-Wire Connector
Voltage, Supply30 VDCOperating Temperature–20°C to 60°C&tab;
Response Time5 ms (Discrete)Ultrasonic Frequency300 kHz
Body MaterialThermoplastic PolyesterContact Rating65 MA
Lead Free Status / Rohs StatusRoHS Exempt Product  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
Page 1/12

Download datasheet (486Kb)Embed
Next
Right-Angle Housing
Straight Housing
Model
Sensing
Number
Range
S18UBA
S18UBAQ
30 to 300 mm
(1.2" to 11.8")
S18UBAR
S18UBARQ
* 9 m cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., S18UBA W/30).
A model with a QD connector requires a mating cable; see page 10.
Information about analog-output models is available on Banner’s website: www.bannerengineering.com
WARNING . . .
Not To Be Used for Personnel Protection
!
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for
personnel protection.
Printed in USA
U-GAGE
S18U Series Sensors with Discrete Output
18 mm Ultrasonic Sensors with TEACH-Mode programming
• Fast, easy-to-use TEACH-Mode programming; no potentiometer adjustments
• Short dead zone
• One NPN and one PNP output
• Two bi-colored status LEDs
• Rugged encapsulated design for harsh environments
• Choose 2 meter or 9 meter unterminated cable, or 5-pin Euro-style QD connector
• Wide operating range of -20° to +60°C (-13° to +140°F)
• Choose either straight or right-angle housing
• Temperature compensation
• Configurable for normally open or normally closed operation
• Fast response time (5 milliseconds)
Models
Supply
Cable*
Voltage
5-wire, 2 m (6.5') cable
5-pin Euro-style QD
10 to 30V dc
5-wire, 2 m (6.5') cable
5-pin Euro-style QD
02/05
Features
Ultrasonic
Housing
Output
Configuration
Straight
Bipolar
NPN/PNP
Right-Angle
Ultrasonic Proximity Mod
P/N 108964 rev. A

S18UBAQ Summary of contents

  • Page 1

    ... Straight Housing Model Sensing Number Range S18UBA S18UBAQ 30 to 300 mm (1.2" to 11.8") S18UBAR S18UBARQ * 9 m cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., S18UBA W/30). A model with a QD connector requires a mating cable; see page 10. ...

  • Page 2

    ... P/N 108964 rev distance from the sensor to the target c = speed of sound in air t = transit time for the ultrasonic pulse C = speed of sound in meters per second m temperature in ° speed of sound in feet per second ft temperature in °F F Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...

  • Page 3

    ... Output Indicator PWR OUT LED LED TEACH Push Button TEACH Figure 1. Sensor features Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 U-GAGE S18U Series Sensor — Discrete Output ™ Sensor Programming Two TEACH methods may be used to program the sensor: • ...

  • Page 4

    ... Teach Accepted Output LED: Flashing Red Teach Unacceptable T Output LED: ON Red Power LED: Must be ON Green Teach Accepted Output LED: Yellow or OFF Teach Unacceptable T Output LED: Flashing Red Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 Output OFF Output ...

  • Page 5

    ... Position the target for the center of the window • “Click” the push button • Without moving the target, “click” the push button again Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 U-GAGE S18U Series Sensor — Discrete Output ™ ...

  • Page 6

    ... T < 0.8 sec • Four-pulse the remote line Result • Either Normally Open or Normally Closed operation is selected, depending on previous condition. Result • Push buttons are either enabled or disabled, depending on previous condition. Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...

  • Page 7

    ... Less than 1.7% of sensing distance upon power-up (see Temperature Compensation, page 2) Application Notes Objects passing inside the specified near limit may produce a false response. Certifications Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 S18U Series Sensor — Discrete Output ™ ...

  • Page 8

    ... Hookups Maximum Target Rotation Angle Aluminum target used 100 mm 150 mm 200 mm 250 mm Sensing Distance QD Models bn +10 - 30V Load bk Load Remote Teach shield Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 300 mm ...

  • Page 9

    ... Cabled Models 6.0 mm (0.24") 80.8 mm (3.18") 53.8 mm (2.12") Cabled Models 85.1 mm (3.35") 58.0 mm (2.29") Transducer 6.0 mm (0.24") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 S18U Series Sensor — Discrete Output ™ Dimensions Straight Housing Transducer 10.6 mm (0.42") 18.0 mm (0.71") Right-Angle Housing 3 ...

  • Page 10

    ... Accessories Quick-Disconnect Cables Length Dimensions 2 m (6.5 (15 (30 max. (1.7" max. (1.5" (6.5 (15 (30') M12 x 1 ø (0.6") Pinout ø (0.6") M12 x 1 White Brown Blue Black Gray 38 mm max. (1.5") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 ...

  • Page 11

    ... Thru 63.5 mm (2.50") 71.1 mm 2.7 mm (2.80") (0.10") Banner Engineering Corp. Minneapolis, MN U.S.A. • www.bannerengineering.com • Tel: 763.544.3164 U-GAGE S18U Series Sensor — Discrete Output ™ Mounting Brackets SMB18SF 41 mm (1.6") M18 x 1 internal thread 20.8 mm (0.82" ...

  • Page 12

    ... P/N 108964 rev A. Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period ...