SLM80B6 BANNER ENGINEERING, SLM80B6 Datasheet - Page 6

• Manufacturer Part Number: SLM80B6
• Description: Ultrasonic Slot Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of SLM80B6

• Sensing Range Min: 1.5mm
• Sensing Range Max: 80mm
• Operating Temperature Range: -20°C To +60°C
• Supply Voltage: 30VDC
• Body Material: Die-cast Zinc
• Sensor Terminals: Cable
• Features: Opposed-Mode
• Brand/series: SLM
• Current, Switching: 100 mA
• Function: Vane
• Ip Rating: IP67
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 80 mm
• Sensing Mode: Opposed
• Technology: Photoelectric
• Termination: 4-Wire Cable
• Voltage, Supply: 30 VDC
• Accessories Available: Cordsets
• Contact Rating: 25 MA
• Sensor Output: NPN/PNP
• Sensor Body Material: Die-cast Zinc

SLM Series Slot Sensors
P/N 122703 rev. D
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can
cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and
IEC standards for personnel protection.
WARNING . . .
Not To Be Used for Personnel Protection
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering
Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned
to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.