QS18UPA BANNER ENGINEERING, QS18UPA Datasheet - Page 7

• Manufacturer Part Number: QS18UPA
• Description: Ultrasonic Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Ultrasonicr

Specifications of QS18UPA

• Sensing Range Min: 50mm
• Sensing Range Max: 500mm
• Switching Frequency: 300kHz
• Operating Temperature Range: -20°C To +60°C
• Supply Voltage: 30VDC
• Sensor Terminals: Cable
• Control Output Type: PNP
• Frequency: 300kHz
• Body Style: Miniature
• Brand/series: World-Beam®
• Current, Switching: 100 mA
• Function: Proximity
• Ip Rating: IP68
• Mounting Type: Threaded
• Output: PNP, SPST
• Primary Type: Proximity
• Range, Measurement: 500 mm
• Technology: Ultrasonic
• Termination: 4-Wire Cable
• Voltage, Supply: 30 VDC
• Accessories Available: Cordsets, Brackets and Wave Guide
• Sensor Output: PNP

Sensing Range
Supply Voltage
Ultrasonic Frequency
Supply Protection
Circuitry
Output Configuration
Output Protection
Output Ratings
Output Response Time
Delay at Power-Up
Temperature Effect
Repeatability
Minimum Window Size
Hysteresis
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Vibration and
Mechanical Shock
Temperature Warmup
Drift
Application Note
Certifications
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: [phone]
50 to 500 mm (2" to 20")
12 to 30V dc (10% maximum ripple); 25 mA max. (exclusive of load)
300 kHz, rep. rate 7.5 ms
Protected against reverse polarity and transient voltages
SPST solid-state switch conducts when target is sensed within sensing window; one NPN (current sinking) or one
PNP (current sourcing), depending on model.
Protected against short circuit conditions
100 mA maximum load; see Application Note 1
OFF-state leakage current: < 10 microamps (sourcing); < 200 microamp (sinking); see Application Note 2
NPN saturation: < 1.6V @ 100 mA
PNP saturation: < 3.0V @ 100 mA
15 milliseconds
300 milliseconds
Non-encapsulated models: ± 0.05% per °C from -20° to +50° C, ± 0.1% per °C from +50° to +60° C
Encapsulated models: ± 0.05% per °C from 0° to +60° C, ± 0.1% per °C from -20° to 0° C
0.7 mm
5 mm
1.4 mm
Sensing window limits: TEACH-mode programming of near and far window limits may be set using the push button
or remotely via TEACH input (see page 3).
Range Indicator (Red/Green)
Green — Target is within sensing range
Red — Target is outside sensing range
OFF — Sensing power is OFF
Housing: ABS
Push Button: TPE
Leakproof design, rated NEMA 6P; IEC IP67 or IP68, depending on model (see page 1); UL type 1
2 m (6.5') or 9 m (30') 4-conductor PVC jacketed attached cable or 4-pin Euro-style integral QD (Q8), or
4-pin Pico-style integral QD (Q7), or 4-pin Euro-style 150 mm (6") pigtail QD (Q5), or 4-pin Pico-style 150 mm (6")
pigtail QD (Q)
Temperature: -20° to +60°C (-4° to +140°F)
Maximum relative humidity: 100%, non-condensing
All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06",
maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G 11 ms duration, half sine wave.
See Temperature Compensation, page 2
1. If supply voltage is > 24V dc, derate maximum output current 5 mA/°C above 50°C.
2. NPN OFF-state leakage current is < 200 μA for load resistances > 3 kΩ or optically isolated loads.
3. Objects passing inside the specified near limit may produce a false response.
For load current of 100 mA, leakage is < 1% of load current.
WORLD BEAM
Specifications
®
QS18U Series Ultrasonic Sensors
Teach/Output Indicator (Yellow/Red)
Yellow — Target is within taught limits
OFF — Target is outside taught window limits
Red — Sensor is in TEACH mode
Push Button Housing: ABS
Lightpipes: Polycarbonate
P/N 119287 rev. E
7