T30UXDB BANNER ENGINEERING, T30UXDB Datasheet

no-image

T30UXDB

Manufacturer Part Number
T30UXDB
Description
T30UX Series W/ Discrete Output
Manufacturer
BANNER ENGINEERING
Datasheet

Specifications of T30UXDB

Range
200 Mm To 2 M
Input
10 To 30V Dc
Output
NPN PNP NO NC Selectable
Body Style
Round
Range, Measurement
200 mm to 2 m
Response Time
92 ms
Voltage, Supply
10-30 VDC
Accessories Available
Cordsets and Brackets
Lead Free Status / Rohs Status
RoHS Compliant part
Printed in USA
* Only standard 2 m (6.5') cable models are listed. For 4-Pin Euro-Style integral QD, add suffix “Q8” to the model number (e.g., T30UXDAQ8). For 150 mm (6") PUR pigtail
A model with a QD connector requires a mating cable; see page 9.
T30UXDA
T30UXDB
T30UXDC
cable with 4-Pin threaded Euro-Style QD, add suffix “QPMA” to the model number (e.g., T30UXDAQPMA). For 9 m (30') cable, add suffix “W/30” to the model number (e.g.,
T30UXDA W/30).
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Models
WARNING . . .
100 mm to 1 m
200 mm to 2 m
300 mm to 3 m
(11.8" to 118")
Range and
Frequency
(3.9" to 39")
(7.8" to 78")
224 kHz
174 kHz
114 kHz
Not To Be Used for Personnel Protection
2 m (6.5')
Standard
Cable*
cable
U-GAGE
Ultrasonic Sensor with TEACH-Mode Configuration
1, 2 and 3 m versions with short dead zones (10% of max range)
Built-in temperature compensation
Fast, easy-to-use TEACH-mode configuration; no potentiometer adjustments
Remote TEACH for security and convenience
Wide operating temperature range of −40
Outputs can be set for either NPN (sinking) or PNP (sourcing), Normally Open (N.O.)
or Normally Closed (N.C.)
Compact, self-contained, right-angle sensor package with fully encapsulated
electronics
Supply Voltage
10 to 30V dc
®
Models
T30UX Series with Discrete Output
10/08
NPN, PNP, NO, NC, Selectable
Discrete Output
Features
º to +70º C (−40º to +158º F)
Response Time
135 ms
45 ms
92 ms
P/N 138381 rev. B
224, 174 or 114 kHz
Ultrasonic,

Related parts for T30UXDB

T30UXDB Summary of contents

Page 1

... T30UXDA 224 kHz 200 (7.8" to 78") T30UXDB 174 kHz 300 (11.8" to 118") T30UXDC 114 kHz * Only standard 2 m (6.5') cable models are listed. For 4-Pin Euro-Style integral QD, add suffix “Q8” to the model number (e.g., T30UXDAQ8). For 150 mm (6") PUR pigtail cable with 4-Pin threaded Euro-Style QD, add suffix “ ...

Page 2

... T = temperature in ° speed of sound in feet per second ft temperature in °F F Green Power ON/OFF LED Red Signal Strength LED Amber Discrete Output LED Figure 1. Features Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 Amber Mode LEDs ...

Page 3

... The sensor will revert to previously saved configuration and return to RUN mode if TEACH is inactive for 120 seconds after the initial 2 second hold on push button Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE T30UX Series with Discrete Output ® ...

Page 4

... Power LED Signal LED: Must be ON Red or Flashing Red T T Teach Accepted T T Output LED OFF, depending Mode Power LED Teach Not Accepted T Output LED: Flashing Power LED: OFF Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 Output OFF Output ...

Page 5

... Output ON Sensor Output OFF Figure 5. An application for the Auto-Window feature (retroreflective mode) Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE T30UX Series with Discrete Output ® Teaching Limits Using the Auto-Window Feature Teaching the same limit twice automatically centers a window on the taught position (see figure 4 for window sizes) ...

Page 6

... Flash Power 1x, enabled (default ) Repeat twice Push button Flash Power 2x, disabled Repeat twice Temp. comp Flash Power 3x, enabled (default ) Repeat twice Temp. comp Flash Power 4x, disabled Repeat twice 120 second Timeout Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 ...

Page 7

... The temperature warmup drift upon power-up is less than 1% of the sensing distance. Certifications CE Pending < 200 µA for load impedance > 3 kΩ; for load current of 100 mA, leakage < load current NOTE 1: NPN Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE T30UX Series with Discrete Output ® ...

Page 8

... Distance 2500 mm 3000 mm (100.0") (120.0") PNP (Sourcing) Output Selected 30V Load wh shield Remote programming switch (normally open) Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 16.0" 12.0" 8.0" 100 x 100 mm 4.0" 0 4.0" 8.0" 12.0" 16.0" 2400 mm 3000 mm (96.0") (120.0") 16.0" ...

Page 9

... Euro-style MQDEC2-415 Straight MQDEC2-430 with shield 4-pin MQDEC2-406RA Euro-style MQDEC2-415RA Right-angle MQDEC2-430RA with shield Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE T30UX Series with Discrete Output ® Dimensions All measurements given in mm 45.0 [1.77"] 22.5 [0.89"] Ø40.2 [1.58" ...

Page 10

... Stainless steel hardware included 25.4 mm Clearance 50.8 mm (2.00") M30 x 1.5 internal thread 58.7 mm (2.31") 30.0 mm (1.18") 66.5 mm (2.62") Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 36.0 mm ø 15.0 mm 50.8 mm 22.9 mm 25.4 mm 12.7 mm (0.50") 29.0 mm (1.14") ...

Page 11

... Banner Engineering Corp. • Minneapolis, MN U.S.A www.bannerengineering.com • Tel: 763.544.3164 U-GAGE T30UX Series with Discrete Output ® 11 P/N 138381 rev. B ...

Page 12

... T30UX Series with Discrete Output ® WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products ...

Related keywords