RJFEZ21 Amphenol PCD, RJFEZ21 Datasheet - Page 38

• Manufacturer Part Number: RJFEZ21
• Description: CONN SQ FLANGED RCPT-RCPT RJ45
• Manufacturer: Amphenol PCD
• Series: RJF EZr
• Type: Jackr

Specifications of RJFEZ21

• Convert From (adapter End): Jack, 8p8c (RJ45)
• Convert To (adapter End): Jack, 8p8c (RJ45)
• Mounting Type: Panel Mount, Flange (2 Hole)
• Shielding: Unshielded
• Ingress Protection: IP67 - Dust Tight, Waterproof
• Ratings: Cat5e
• Shell Material, Finish: Plastic
• Features: Industrial Environments, Quick Lever Coupling
• Angle: Straight
• Application: Telecom equipments, video control, special machines, motion control
• Brand/series: RJField EZ
• Cable Type: Twisted Pair
• Diameter, Mounting Hole: 1.181 in.
• Flammability Rating: UL 94V-0
• Height: 1.575 in.
• Ip Rating: IP67
• Length: 1.339 in.
• Performance: Cat 5e
• Primary Type: Modular
• Special Features: Industrial
• Specification: RJ45
• Temperature, Operating: -40 to +85 °C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Mounting Feature: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: APC1064

Can be used with most IEEE 1394 cordset brands: No tools required!
Plug Assembly
1. If a fully sealed (IP67) assembly is required: Install the white tape
2. Insert the black O Ring around the front face of the IEEE 1394 plug.
3. Insert the IEEE 1394 cordset into the metallic backshell.
4. Insert the retention spacer laterally onto the cable (this spacer is soft
5. Insert the friction ring laterally onto the cable cordset.
6. Insert the IEEE 1394 plug into the metallic circular shell. Note at this
7. Screw the backshell on the plug body. A spanner may be required to
Important Note: The sealing of the connector is not done by the
black retention spacers which are slotted, but rather by the front face
O-Ring (Fig 2).
Receptacle Assembly
To Solder your cable onto the PCB:
1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a & 1b).
2. Insert the IEEE 1394 module from the rear of the connector.
Removing Modules
1. Insert the removal tool FWF ODE
2. Push the module back with thumb.
n
n
n
Connector Type
6:
2:
7:
Shell plating
N:
G:
Accessories
Assembly Instructions
around the plug to cover the 4 holes of the overmolding. If there are
no holes omit this step.
This O Ring will ensure the seal.
so as to adapt to various overmolding styles) and slide the IEEE 1394
plug into this retention spacer.
step that the main key is used for polarization.
fully close the backshell to the circular shell.
from the front
Metallic Caps
Panel Gasket for square flange receptacle
(Thickness: 0,8 mm [.031]): JE15
Receptacle Insert removal tool: FWF ODE
Plug
Square Flange Receptacle
Jam Nut Receptacle
Nickel - ROHS Compliant
Olive Drab Cadmium
FWF TVC
2
G
36
3
5
7a
1a
1b
1
4
6
2
7b
1
2
2