XCMD2110M12 SQUARE D, XCMD2110M12 Datasheet - Page 155

• Manufacturer Part Number: XCMD2110M12
• Description: LIMIT SWITCH, 1NO.1NC, 240VAC, 250VDC, 3A
• Manufacturer: SQUARE D

Specifications of XCMD2110M12

• Actuator Style: Top Plunger
• Operating Force Max: 0.06N
• Switch Operation: (ON)
• Contact Voltage Ac Max: 240V
• Contact Voltage Dc Max: 250V
• Contact Current Ac Max: 3A
• Contact Current Dc Max: 3A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Limit Switches
Miniature
Class 9007 Type MS and ML
03/2007
®
®
Bottom Entrance Cable
4-Pin Micro-Connector
File E42259
CCN NKCR
File LR 25490
Class 3211 03
Marking
Shown with Standard
Shown with
Description
Mini-Switch (MS) miniature switches meet the need for very small, enclosed switches with
environmental sealing. A full range of styles are available, including top push plunger, parallel
roller plunger, cross roller plunger, rotary lever, and omnidirectional whisker. Factory pre-
wiring with industrial grade cable (type SJTO) eliminates the need to remove the cover to wire
the switch. Bottom- or side-entrance cable connection is available.
Housings are rugged diecast zinc construction. Excellent sealing is achieved with
an epoxy compound encapsulation of the electrical cable connections and switch housing.
A Viton
Features
The heavy-duty, completely encapsulated miniature MS limit switch is intended for difficult
applications such as machine tools, earth moving equipment, and general transportation.
Key features include:
Rotary Head
Conventional rotary limit switches have mounting holes in the base or body of the switch. In
our rotary design, mounting holes are located in the head also. Cycling and stress forces are
transmitted from the shaft in the head directly to the mounting bolts. The strain on the joint
between the body and the head is eliminated. The result is a stronger and more rigid
mounting, less subject to vibration or a weakness in the joint.
Bulkhead Mounted Mini-Switches
The MS housing is designed for multiple switching by gang mounting several switches.
Two mounting holes can be tapped in the top of each switch (except rotary lever) for #8-32
thread bolts. Switches can be readily mounted to any frame or plate by drilling holes through
same to accommodate #8-32 bolts and switch plungers. Both sides of the housing are
counter-bored for surface mounting.
•
•
•
•
•
•
•
•
Options
•
•
•
•
Symmetrical design and top mounting holes for easy gang mounting of several switches for
multiple switching
Epoxy encapsulation sealing the pre-wired heavy duty #18 AWG SJTO cable and protecting
against temporary submersion
Single-pole double-throw (SPDT) Form C or Form Z, 1 N.O. + 1 N.C. contact
Fine rotary lever adjustment
Compact diecast zinc housing
NEMA Type 6P and IP67 rated
10 ampere continuous current rating
Gold contacts for low level logic switching
Gold crosspoint contacts
Double-break contacts (Type ML only)
Side-entrance cable or connectors
Low force (top plunger models only)
®
O-ring seal on the plunger keeps liquids from entering the switch cavity.
© 1997–2007 Schneider Electric All Rights Reserved
•
•
•
•
•
•
•
•
Stainless steel rollers
UL Listed and CSA Certified
CE Marking
Standard temperature range:
-40 to +220 °F (-40 to +104 °C)
Yellow or gray SJTO cable
4- or 5-pin micro-connectors, AC and DC
#16 AWG SJTO cable
Tapped 8-32 holes on top of housing
155