XCMD2116L1 SQUARE D, XCMD2116L1 Datasheet - Page 25

• Manufacturer Part Number: XCMD2116L1
• Description: LIMIT SWITCH, 1NO.1NC, 240VAC, 250VDC, 6A
• Manufacturer: SQUARE D

Specifications of XCMD2116L1

• Actuator Style: Roller Lever
• Operating Force Max: 0.1N
• Switch Operation: (ON)
• Contact Voltage Ac Max: 240V
• Contact Voltage Dc Max: 250V
• Contact Current Ac Max: 6A
• Contact Current Dc Max: 6A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Limit Switches
Osiswitch
XEP and XC0
03/2007
30˚
Mounting (continued)
Electrical characteristics
10
10
10
10
5
2
5
2
5
2
7
6
5
4
0,1 0,2 0,5 1 2
®
A B C
1000 V
Miniature Snap Switches
1500 V
5
Current
10
30˚
16 A
Resistive circuit
Inductive circuit
Cos
0.8
A B C
Actuation method (continued)
Lever operators:
•
•
Mounting—Tightening torque
The tightening torque of the fixing screws must conform to the following values:
Ø of mounting screw
Tightening torque,
N•cm (lb-in)
Resistance to mechanical shock and vibration
•
•
Operating curves
These indicate the electrical life of the miniature snap switches under standard
conditions [20°C (68 °F), 1 cycle/2 seconds], by showing the number of switching
operations which can be performed with given types of load. For sealed snap
switches, the operating rate is 1 cycle/6 s.
Insulation resistance
The insulation resistance of the miniature snap switches is generally greater than
50,000 M
Dielectric strength
The dielectric strength of our miniature snap switches is generally superior to:
•
•
•
when actuation is by a roller lever, force should preferably be applied in the
direction shown in the diagrams opposite,
where the movements involved are fast, the ramp should be so designed as to
ensure that the operator is not subjected to any violent impact or abrupt release.
Resistance to shock and vibration depends on the mass of the moving parts and
on the forces holding the contacts together.
In general, for a miniature snap switch without accessory:
— vibration > 10 gn, 10 to 500 Hz
— shock > 50 gn 11 ms 1/2 sine wave
1500 V between live parts and earth
1000 V between contacts
600 V between contacts for switches with an inter-contact distance less than 0.3 mm
measured at 500 Vdc
Maximum
Minimum
© 1997–2007 Schneider Electric All Rights Reserved
2
25 (2.21)
15 (1.33)
2.5
35 (3.10)
25 (2.21)
3
60 (5.31)
40 (3.54)
3.5
100 (8.85)
60 (5.31)
4
150 (13.28)
100 (8.85)
25