DT800020 Red Lion Controls, DT800020 Datasheet
DT800020
Manufacturer Part Number
DT800020
Description
Rate Counter
Manufacturer
Red Lion Controls
Datasheet
1.DT800000.pdf
(4 pages)
Specifications of DT800020
No. Of Digits / Alpha
5
Signal Input Type
Magnetic Or Logic
Display Mode
LCD Negative Image Transmissive
Meter Signal Input
Frequency
Character Size
0.6"
Ip/nema Rating
IP65 / NEMA 4X
Backlighting Color
Red
Operating Temperature, Maximum
60 °C
Operating Temperature, Minimum
0 °C
Overall Size
49.80 mm W x 32.80 mm H
Supply Voltage, Logic
3 V
Backlight Power
9-28VDC
Counter Supply Voltage
9-28VDC
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
DESCRIPTION
Timebase Increments by setting the appropriate DIP switches on the rear of the
unit. The internal 3.6 VDC lithium battery will operate continuously for at least
5 years. It has a 5-digit LCD display with 0.6 inch (15.2 mm) high digits. The
displays are available in positive image reflective (black digits, reflective
background) or negative image transmissive (illuminated digits, dark
background) with red or yellow/green backlighting. Backlight version units
require power from an external 9 to 28 VDC supply.
viewing window. The sealed front panel meets NEMA 4X/IP65 specifications
for wash-down and/or dusty environments, when properly installed.
attach to the rear of an installed Ditak 8. The optional supply can be powered
from 85 to 250 VAC, and can provide power for the backlighting of a unit and
most sensors.
SAFETY SUMMARY
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
DITAK 8 - ADJUSTABLE TIMEBASE 5-DIGIT RATE INDICATOR
LCD, POSITIVE REFLECTIVE OR NEGATIVE TRANSMISSIVE
0.6 INCH (15.2 mm) HIGH DIGITS
ADJUSTABLE TIMEBASE FROM 4 MSEC TO 63 SEC
INTERNAL LITHIUM BATTERY PROVIDES OVER 5 YEARS OF
NEMA 4X/IP65 SEALED FRONT PANEL BEZEL
ACCEPTS MAGNETIC OR LOGIC TYPE SIGNAL INPUTS
WIRE CONNECTIONS MADE VIA SCREW CLAMP TYPE
DIMENSIONS In inches (mm)
The Ditak 8 is a self-powered rate indicator which features selectable
The unit is constructed of a lightweight, high impact plastic case with a clear
The optional Micro Line/Sensor Power Supply (MLPS1000) is designed to
All safety related regulations, local codes and instructions that appear in the
WITH YELLOW/GREEN OR RED BACKLIGHTING
CONTINUOUS OPERATION
TERMINALS
installation and operation of the unit.
Read complete instructions prior to
CAUTION: Risk of Danger.
2.95 (74.9)
1.54 (39.1)
0.15
(3.8)
Note: Recommended minimum clearance (behind the panel) for
mounting clip installation is 2.15" (54.6) H x 3.0" (76.2) W.
1.38 (35.1)
1
0.13 (3.2)
SPECIFICATIONS
1. DISPLAY: 5-Digit LCD, 0.6" (15.2 mm) high digits.
2. POWER SOURCE: Internal 3.6 V lithium battery provides over 5 years of
3. BACKLIGHT POWER REQUIREMENTS: 9 to 28 VDC @ 35 mA.
4. SIGNAL INPUT: 0 to 10 KHz from a magnetic or bi-polar output (with a
5. TIMEBASE: Adjustable in 1/256 sec (3.906 msec) increments via DIP
6. ENVIRONMENTAL CONDITIONS: Operating Temperature: 0 to 60 °C
7. CONSTRUCTION: High impact plastic case with clear viewing window
ORDERING INFORMATION
MODEL NO.
continuous service (battery life is dependent upon usage).
Above 26 VDC, derate operating temperature to 50 °C. Must use the MLPS1
or an NEC Class 2 or Limited Power Source (LPS) rated power supply.
50% duty cycle). Min. input sensitivity is 0.9 V. Max. input = 28 VDC.
switches located at the rear of the unit. Timebase ranges from 3.906 msec to
63.99 sec; 0.01% ±1 digit accuracy.
(Above 50 °C derate backlight operating voltage to 26 VDC max.)
Storage Temperature: -40 to 80 °C
Operating and Storage Humidity: 85% max. (non-condensing) from 0 °C
Vibration According to IEC 68-2-6: Operational 5 to 500 Hz, in X, Y, Z
Shock According to IEC 68-2-27: Operational 30 g’s, 11 msec in 3 directions.
Altitude: Up to 2000 meters
(Panel gasket and mounting clip included). Installation Category I, Pollution
Degree 2.
MLPS
to 60 °C.
direction for 1.5 hours, 5 g’s.
DT8
(32.8)
1.29
DESCRIPTION
Adjustable Timebase Tachometer
Adjustable Timebase Tachometer with Yellow/
Green Backlighting
Adjustable Timebase Tachometer with Red
Backlighting
Micro Line Sensor/Power Supply
2.68
(68
+.6
-.0
+.025
-.000
)
1.30
(33
+.6
-.0
+.024
-.000
)
Bulletin No. DT8-E
Drawing No. LP0555
Released 04/10
PART NUMBER
MLPS1000
DT800000
DT800010
DT800020
Related parts for DT800020
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Counter
Manufacturer:
Red Lion Controls
Datasheet:
Part Number:
Description:
Miniature Length Sensor
Manufacturer:
Red Lion Controls
Datasheet:
Part Number:
Description:
Model Lsc - Single Channel Output Length Sensor
Manufacturer:
Red Lion Controls
Datasheet:
DT800020 Summary of contents
Page 1
... Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 2.15" (54. 3.0" (76.2) W. 0.13 (3.2) 1.29 1.54 (39.1) (32.8) 0.15 1.38 (35.1) (3.8) 1 Bulletin No. DT8-E Drawing No. LP0555 Released 04/10 PART NUMBER DT800000 DT800010 DT800020 MLPS1000 2.68 +.025 -.000 (68 +.6 ) -.0 1.30 +.024 -.000 +.6 (33 ) -.0 ...
Page 2
SPECIFICATIONS (Cont'd) 8. CERTIFICATIONS AND COMPLIANCES: SAFETY IEC 1010-1, EN 61010-1: Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1. IP65 Enclosure rating (Face only), IEC 529 Type 4X Enclosure rating (Face only), UL50 ELECTROMAGNETIC COMPATIBILITY ...
Page 3
REAR PANEL DIP SWITCHES When viewing the Ditak 8 from the rear, there are two banks of DIP switches located along the top edge of the PC board. The bank of eight switches to the left is labeled SWA and ...
Page 4
... The Company’s option. The Company disclaims all liability for any affirmation, promise or representation with respect to the products. The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against damages, claims, and expenses arising out of subsequent sales of RLC products or products ...