TES 1-1222 TRACOPOWER, TES 1-1222 Datasheet - Page 2

• Manufacturer Part Number: TES 1-1222
• Description: DC/DC, 12V/±12V, 1W, SMD
• Manufacturer: TRACOPOWER

Specifications of TES 1-1222

• Output Type: Single
• No. Of Output Channels: 2
• Input Voltage: 10.8V To 13.2V
• Power Rating: 1W
• Output Current: 40mA
• Output Current 2: 40mA
• Supply Voltage: 12V
• Dc / Dc Converter Case Style: SMD
• Isolation: RoHS Compliant
• Dc / Dc Converter O/p Type: Single
• No. Of Outputs: 2
• Rohs Compliant: Yes

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current no load /full load
Surge voltage (1 sec. max.)
Reverse voltage protection
Input filter
Output Specifications
Voltage set accuracy
Voltage balance (dual output models)
Regulation
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217E)
Isolation voltage (60sec)
Isolation capacity
Isolation resistance
Switching frequency
Frequency change over line and load
Physical Specifications
Case material
Package weight
Reflow soldering profile
Output voltage variation dependent on load (at nominal input voltage)
5 VDC models:
+10%
-10%
0%
0
– Input variation
– Load variation
– Operating
– Storage
– Input/Output
– Input/Output
– Input/Output
Load
50%
(see also enclosed derating curve)
100%
Max.
Typicaly
Min.
single output models: 1.7 g (0.04 oz)
dual output models: 2.0 g (0.05 oz)
24 Vin models: 8 mA / 55 mA typ.
24 Vin models: 30 V max.
12 Vin models: 15 mA / 110 mA typ.
12 Vin models: 18 V max.
5 Vin models: 30 mA / 260 mA typ.
5 Vin models:
+10%
other models:
-10%
0%
0
0.3 A max.
internal capacitors
±2 % (at 60% load)
±1 % max.
1.2 % / 1 % change Vin
see graph below
120 mVpk-pk max.
± 0.02 % / °C
limited 0.5 sec. max.
33 µF max.
–40 °C ... +85 °C (no derating)
–55 °C ... +125 °C
95 % rel H max.
>2’000’000 h @ 25 °C
1‘500 VDC
40 pF typ.
>1‘000 Mohm
100 kHz typ. (frequency modulation)
± 30 %
epoxy molding compound
(flammability to UL 94V-0 rated)
as per
9 V max.
IPC/JEDEC J-STD-020C
DC/DC Converters
TES  Series
Load
tbd
50%
100%
Page 2 of 3
Max.
Typicaly
Min.
 Watt