DC/DC, 24V/15V, 1W, SMD

TES 1-2413

Manufacturer Part NumberTES 1-2413
DescriptionDC/DC, 24V/15V, 1W, SMD
ManufacturerTRACOPOWER
TES 1-2413 datasheet
 


Specifications of TES 1-2413

Output TypeSingleNo. Of Output Channels1
Input Voltage21.6V To 26.4VPower Rating1W
Output Voltage15VOutput Current65mA
Supply Voltage24VDc / Dc Converter Case StyleSMD
IsolationRoHS CompliantDc / Dc Converter O/p TypeSingle
No. Of Outputs1Rohs CompliantYes
1
Page 1
2
Page 2
3
Page 3
Page 2/3

Download datasheet (166Kb)Embed
PrevNext
Input Specifications
Input current no load /full load
Surge voltage (1 sec. max.)
Reverse voltage protection
Input filter
Output Specifications
Voltage set accuracy
Voltage balance (dual output models)
Regulation
– Input variation
– Load variation
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Capacitive load
General Specifications
Temperature ranges
– Operating
– Storage
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217E)
Isolation voltage (60sec)
– Input/Output
Isolation capacity
– Input/Output
Isolation resistance
– Input/Output
Switching frequency
Frequency change over line and load
Physical Specifications
Case material
Package weight
Reflow soldering profile
Output voltage variation dependent on load (at nominal input voltage)
5 VDC models:
+10%
0%
-10%
0
50%
Load
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 15 mA / 110 mA typ.
24 Vin models: 8 mA / 55 mA typ.
5 Vin models:
12 Vin models: 18 V max.
24 Vin models: 30 V max.
(see also enclosed derating curve)
single output models: 1.7 g (0.04 oz)
dual output models: 2.0 g (0.05 oz)
other models:
+10%
Max.
0%
Typicaly
Min.
-10%
100%
0
DC/DC Converters
TES  Series
9 V max.
0.3 A max.
internal capacitors
±2 % (at 60% load)
±1 % max.
1.2 % / 1 % change Vin
see graph below
120 mVpk-pk max.
± 0.02 % / °C
limited 0.5 sec. max.
33 µF max.
–40 °C ... +85 °C (no derating)
–55 °C ... +125 °C
95 % rel H max.
>2’000’000 h @ 25 °C
1‘500 VDC
40 pF typ.
>1‘000 Mohm
100 kHz typ. (frequency modulation)
± 30 %
epoxy molding compound
(flammability to UL 94V-0 rated)
as per
IPC/JEDEC J-STD-020C
tbd
50%
100%
Load
 Watt
Max.
Typicaly
Min.
Page 2 of 3