E22D EATON CUTLER HAMMER, E22D Datasheet - Page 32

• Manufacturer Part Number: E22D
• Description: Incandescent Light Source Unit
• Manufacturer: EATON CUTLER HAMMER

30
Technical data – Trigger action actuators
Description
Application
Key features
Environmental ratings (actuator)
Ingress protection
Operating temperature
Storage temperature
Altitude
Humidity
Flammability
UV resistance
The E22LTA2 is a latching, trigger-action, twist-to-release pushbutton
actuator designed specifically for use as an Emergency Stop Switch.
The E22MGTA is a rectangular guard designed to prevent accidental or
inadvertent actuation of the E22TLA actuator. It is also designed to permit
easy knob rotation access for manually resetting the switch.
The E22CB1, E22CB11 & E22CB1E contact blocks are specially marked
contact blocks indicating compliance with IEC 60947-5-1 Annex K.
The E22LTA2 actuator and E22CB* contact blocks are intended to be the
primary and/or one of several series-connected emergency stop switches in
a control panel. The N.C. (normally closed), break electrical contacts are
D.O.A. (direct opening action) which are designed to be forcibly opened by
the movement of the actuator in the event that the contact should be tack
welded etc.
UL (NEMA) 1, 2, 3, 3R, 4, 4X, 12 & 13 and IEC IP 65 when mounted on a
flat surface of a similarly rated enclosure. Above ratings do not apply to
applications where devices are mounted directly unto a machine without
the use of a separate console or enclosure. If not installed in a suitable
panel or enclosure, precautions must be taken to safeguard contact blocks
against electrical contact or shock and from contamination from
environmental or working conditions of the machine.
–20 to +60 C
–40 to +80 C
2,000m
Max 95% RH @ 60 C
UL94 V-O rated
Shield actuator from excessive exposure to UV, and routinely perform a
functional test of the emergency stop switch and inspect actuator for fading
and cracking after every 500 hours of UV exposure.
Mushroom head button (40mm diameter) for easy actuation (per EN418
Section 4.4).
Safety red coloured button per ANSI Z535.1 and EN418 Section 4.4.3.
Manually resettable actuator.
Rectangular guard is coloured safety yellow per ANSI Z535.1 and
provides yellow background for the actuator per EN418 Section 4.4.3.
All external pushbutton and guard materials have a V-0 flammability
rating per UL94.
Contact blocks are A600/Q600 rated per UL508 and AC15/DC13 rated per
IEC 60947-5-1.
N.C. (normally closed), break contact blocks are positive opening or
D.O.A. (direct opening action) in accordance with EN418 Section 4.1.2.
Suitable for isolation per IEC 60947-5-1.
22.5mm Pushbuttons, Indicating Lights and
Selector Switches
E22 Series - Technical data
www.eatonelectrical.com
Mechanical endurance ratings (actuator)
Life
Frequency of operation
Vibration
Shock
Bump
Electrical ratings (contact blocks)
AC Life (AC15)
DC Life (DC13)
N.C. Contacts
Short circuit co-ordination rating
Short circuit co-ordination fuse
Standards & certifications
100,000 cycles (actuation & release)
6 per minute
5g, 0.7mm peak to peak, 10 sweeps, 10 to 500Hz
30g, 12ms
25g, 6ms for 1,000 cycles
A600 & Q600 per UL508
AC15 & DC13 per IEC 60947-5-1
120Vac, 6A - 1,000k operations
24Vdc, 4A - 400k operations
DOA (direct opening action) per IEC 60947-5-1
1kA
GE Power Controls TIA 10, Red Spot type gG, 10A 660Vac 460Vdc, BS88-2,
per IEC 60269-2-1
UL Listed E-Stop device per file # E217948
Certified to EN 60947-5-1 & EN 60947-5-5 per DEMKO certificate
# 129648-01/A1
Certified to EN418 per DEMKO Certificate # 129648-02/A2
UL508 listed per file # E131568
CSA certified per file # LR68551
August 2004
PGO4700001U