E22D EATON CUTLER HAMMER, E22D Datasheet - Page 52

• Manufacturer Part Number: E22D
• Description: Incandescent Light Source Unit
• Manufacturer: EATON CUTLER HAMMER

50
Accessories
Standard base
Notes
Bases also suitable for mounting with extension tubes listed on page 51.
Stacklight base and gasket are supplied as standard with two sets of base mount holes.
One set with centre-to-centre spacing of 44.5 mm and another set with centre-to-centre spacing of 42 mm.
Audible alarm units must be wired via the steady circuit on flashing base units.
Bases are supplied with top cover.
Stacklights
E26 Series - Accessories
Description
Standard base
For use with steady
incandescent or steady/
flashing LED
Flashing base
Enables configuration
of incandescent light
modules for steady or
flashing operation
Voltage
12V ac/dc to
240V ac/dc
12V dc
24V ac/dc
48V ac/dc
240V ac/dc
120V ac/dc
www.eatonelectrical.com
Flashing base
Catalogue
numbers
E26BL
E26BFV1
E26BFV2
E26BFV3
E26BFV4
E26BFV5
Flasher
Flasher
base voltage
12V dc
24V ac/dc
48V ac/dc
120V ac/dc
240V ac/dc
Approximate dimensions (mm)
Drill 2 holes in Stacklight base to 4.3 mm. Mount Stacklight
with M4 screws. Tighten to torque of 0.79 Nm.
Drill 2 holes in Stacklight base to 4.3 mm. Mount Stacklight
with M4 screws. Tighten to torque of 0.79 Nm.
Max. Allowable
no. of light
modules
2
4
6
6
6
August 2004
PGO4700001U