1.69.511.054/1502 RAFI, 1.69.511.054/1502 Datasheet

SIGNAL LAMP, TRANSPARENT, GREEN

1.69.511.054/1502

Manufacturer Part Number
1.69.511.054/1502
Description
SIGNAL LAMP, TRANSPARENT, GREEN
Manufacturer
RAFI
Datasheet

Specifications of 1.69.511.054/1502

Bulb Size
8.5mm
Base Type
Solder Terminal
Supply Voltage
24V
Power Rating
0.84W
Base Colour
Colour
Connector Type
Height Above Panel
Ip/nema Rating
LED / Lamp
Lamp Base Type
Solder Terminal
Colour
Transparent Green
Height Above Panel
5mm
Rohs Compliant
Yes
Led / Lamp Size
8.5mm
Panel Cutout Diameter
7mm
3
Signal lamps
General information
Signal Lamps with integral lamps/LEDs
The soldered lamps/LEDs without base cannot be repla-
ced.
Signal Lamps with lamp socket
An integral lamp socket allows replacement of
lamps/LEDs of the appropriate type.
Filament operating life
Operating life specifications refer to AC voltage operati-
on. If operated with DC voltage, these values are reduced
by 40%.
Color and lenses
transparent
opaque
CE-Conformity
The CE-Conformity of the products of Chapter ”Signal
Lamps” can be divided into the following groups –
corresponding to the Low-Voltage Directives 72/23/EWG:
All products with voltage > 50 V
For these components the Low-Voltage Directive 73/23/
EWG aplies.
All products with voltage < 50 V
No directive applies for these components.
EMC-Law
The components of this catalogue are within the meaning
of the law concerning the electromagnetic conformity
(= EMC-Law) ”basic components as, for ex., switches,
signal lamps or like” and, therefore, do not fall within the
scope of the EMC-Law.
3 - 2
= clear, grooved on inner surface for better
= translucent but not clear
light diffusion
Standard mounting dimensions
We recommend use of mounting hole diameters 16, 22
and 30 mm, as these comply with international standard
recommendations and DIN standards.
Limit values
The voltage specified as the limit value is the standard
insulating voltage for the signal lamps.
The permitted ambient temperatures are always specified
in conjunction with the maximum power of the lamps
used, and the signal lamp should be located outside of
the space subject to increased temperature.
Declaration of conformity
Declarations of conformity for all concerned products are
available and can be delivered upon request.
Please always state the exact order reference of the desi-
red product.
Marking
The marking will be corresponding to the Low-Voltage
Directive 73/23/EWG resp. the Directive ”CE-Marking
93/68/EWG” either on the packing or on the product itself.
Signal lamps

Related parts for 1.69.511.054/1502

1.69.511.054/1502 Summary of contents

Page 1

Signal lamps General information Signal Lamps with integral lamps/LEDs The soldered lamps/LEDs without base cannot be repla- ced. Signal Lamps with lamp socket An integral lamp socket allows replacement of lamps/LEDs of the appropriate type. Filament operating life Operating life ...

Page 2

Signal lamps Lens colour suitability for illumination Lens color Suitable for: transparent Filament lamps colourless limited red good yellow good green good blue limited *Neon glow lamps are well suitable Neon lamps Neon lamps may glow on a short time ...

Page 3

Signal lamps with integrated LED General data Signal lamps with integral LED, mounting hole diameter from mm. The mm specification in the product name indicates the appropriate mounting hole diameter of the signal lamps. Content Signal lamps ...

Page 4

Signal lamps with integrated LED Signal lamps with integrated LED Pict.: red Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Length of collar Overall height 3 Mounting depth Mounting hole Mechanical design ...

Page 5

Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, protruding LED Pict.: red Integrated currency Operating voltage U resistor yes yes yes Technical data see ...

Page 6

Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, round flush lens Pict.: green Integrated currency Operating voltage U resistor no according to series resistor according to series resistor ...

Page 7

Signal lamps with integrated LED Signal lamps with integrated LED, 5 mm, triangular flush lens Pict.: red Integrated currency Operating voltage U resistor yes yes yes yes 24 ...

Page 8

Signal lamps with integrated LED Signal lamps with integrated LED, 7.0 mm Pict.: yellow Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth 3 Mounting hole Mechanical design Mounting Terminals Lamp ...

Page 9

Signal lamps with integrated LED Signal lamps with integrated LED, 7.0 mm, round protruding lens Pict.: yellow Operating voltage U Forward current max max ...

Page 10

Signal lamps with integrated LED Signal lamps with integrated LED, 9.1 mm Pict.: red Technical data General information Form of lens Colour of lens Diameter of collar Dimensions Overall height Mounting depth 3 Mounting hole Mechanical design Mounting Terminals Lamp ...

Page 11

Signal lamps with integrated LED Signal lamps with integrated LED, 9.1 mm, round lens Pict.: red Operating voltage U Light intensity 200 mcd 1000 mcd ...

Page 12

Signal lamps with integrated LED Signal lamps with integrated LED Pict.: red Technical data General information Form of lens Colour of LED / lens Diameter of collar Dimensions Overall height Mounting depth 3 Mounting hole Mechanical design Mounting ...

Page 13

Signal lamps with integrated LED Signal lamps with integrated LED, 10 mm, protruding LED Pict.: red Integrated Protecting diode Operating voltage U currency resistor no yes according to series resistor yes according to series resistor ...

Page 14

Signal lamps with integrated LED Signal lamps with integrated LED, 10 mm, round lens Pict.: green Integrated currency Protecting diode resistor yes yes yes yes yes yes yes yes yes yes yes no 3 yes no yes no yes no ...

Related keywords