LEDII150-3W BANNER ENGINEERING, LEDII150-3W Datasheet

LEDII150-3W

Manufacturer Part Number

LEDII150-3W

Description

LED RING LIGHT, INFRARED

Manufacturer

BANNER ENGINEERING

Datasheet

1.LEDII150-3W.pdf (2 pages)

Specifications of LEDII150-3W

Led Configuration

Circle

Led Color

Infrared

Forward Voltage

24V

Forward Current If

350mA

Display Size

150mm

Peak Reflow Compatible (260 C)

Wavelength Typ

880nm

Supply Voltage

24VDC

Color

Infrared

Leaded Process Compatible

Current page: 1 of 2
Download datasheet (208Kb)

*For 9 m (30') cable, add suffix “W30” to the model number (e.g., LEDRI150-3W W30).

Printed in USA

LEDRI150-3W

LEDII150-3W

LEDRI150-3M

LEDII150-3M

Useful Life

Environmental Rating

Operating Conditions

Cleaning Instructions

Certifications

Models*

low-angle light

High-intensity,

Illumination

When operated within specification, output will decrease less than 20% after 20,000 hours and less than 30%

after 30,000 hours.

NOTE: Actual useful life of strobed lights depends on duty cycle.

IEC IP0; NEMA 0

Temperature: 0° to +50° C (+32° to 122° F)

Maximum relative humidity: 90% at 50° C (non-condensing) max.

Regularly remove any dust and dirt from the light source. Blow off dust using anti-static compressed air.

Visible Red

Infrared

640 nm

880 nm

640 nm

880 nm

Color

• 150 mm LED ring light for low-angle illumination. See Banner’s website at

• Uses 3 tiers of LEDs mounted at 75° to the optical axis.

• Low-angle light enhances contrast of surface defects, etching, and embossed marks.

• Well suited for dot-peened or pin-stamped data matrix marks.

• Solid-state LED light source.

• Continuous or strobed operation is selectable via sensor software.

• Black anodized aluminum housing with ¼ - 20 threaded mounting holes.

• The suggested field of view is 80 mm in diameter and the suggested stand off

www.bannerengineering.com

LED..I150-3.. Low-Angle LED Ring Lights (150 mm)

Non-Diffused Lighting for Increased Close-Up Contrast

is 12.5 mm.

Specifications

3-conductor, 2 m (6.5')

attached cable with flying

leads (see wiring table)

2 m (6.5') pigtail with

3-pin, 8 mm male

Pico-style connector

(direct connection to

PresencePLUS P4)

Cable/Connector

Models

11/06

for a complete lighting tutorial.

Features

24V dc ±10% @ 500 mA max.

24V dc ±10% @ 350 mA max.

24V dc ±10% @ 500 mA max.

Voltage supplied by PresencePLUS sensor,

if operating at 24V dc (see sensor manual).

24V dc ±10% @ 350 mA max.

Voltage supplied by PresencePLUS sensor,

if operating at 24V dc (see sensor manual).

Supply Voltage

and Current

P/N 127582 rev. A

Related parts for LEDII150-3W

LEDII150-3W Summary of contents

Page 1

... Models* Illumination LEDRI150-3W LEDII150-3W High-intensity, LEDRI150-3M low-angle light LEDII150-3M *For 9 m (30') cable, add suffix “W30” to the model number (e.g., LEDRI150-3W W30). Useful Life When operated within specification, output will decrease less than 20% after 20,000 hours and less than 30% after 30,000 hours. ...

Page 2

... Black WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products ...

Related keywords

LEDII150-3W datasheet
LEDII150-3W data sheet
LEDII150-3W pdf datasheet
LEDII150-3W component
LEDII150-3W part
LEDII150-3W distributor
LEDII150-3W RoHS
LEDII150-3W datasheet download