LED Area Light

LEDWA62X62W

Manufacturer Part NumberLEDWA62X62W
DescriptionLED Area Light
ManufacturerBANNER ENGINEERING
LEDWA62X62W datasheet
 


Specifications of LEDWA62X62W

Led Module TypeBoard + LEDLed ColorWhite
Power Module ConfigurationSquareSupply Voltage24V
Forward Current @ Test200mAOperating Temperature Range0°C To +50°C
No. Of Pins3Forward Voltage24V
Forward Current If200mA  
1
Page 1
2
Page 2
Page 1/2

Download datasheet (181Kb)Embed
Next
Red or Infrared
LED models
White, Green, or
Blue LED models
Models
LEDIA62X62W
Infrared, 940 nm
LEDRA62X62W
Visible Red, 630 nm
LEDWA62X62W
White, All Visible
LEDBA62X62W
Blue, 464 to 475 nm
LEDGA62X62W
Green, 520 to 540 nm
Light Source
LED, see Models table above for wave lengths
Illumination
High-intensity area light
Supply Voltage and Current
Infrared: 24V dc @ 150 mA max.
Connections
PVC-jacketed 3-conductor 2 m (6.5') attached cable
Construction
Low-carbon steel with black zinc plating, acrylic window
Useful Life
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after
10,000 hours and less than 50% (less than 40% for red and IR models) after 20,000 hours.
Operating Conditions
Temperature: 0° to +50° C (+32° to 122° F)
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use
any other chemicals for cleaning.
Area Light
Wire
Controller Terminal Block
Brown
Blue
White
Printed in USA
LED..A62X62W Series Area Lights
LED Area Lights for use with PresencePLUS
• Low-cost, compact area lights for PresencePLUS Pro sensor. See Banner’s Web site
(www.bannerengineering.com) for a complete lighting tutorial.
• Solid-state LED matrix; continuous or strobed operation is selectable via sensor
software.
• Direct connection to PresencePLUS Pro or to an external power supply using 3
discrete wires.
• Two bracket options available.
Models
Color
FLTI (included with IR lights)
FLTR (included with LEDAPFKS)
FLTB or FLTG
FLTB
FLTG
Specifications
All other colors: 24V dc @ 200 mA max.
Relative humidity: 90% at 50°C (non-condensing) max.
Wiring Table
PresencePLUS Pro
External Power Supply
Pin 1 (+V*)
Pin 2 (-V*)
+5V dc
Pin 4 (strobe)
-V
02/07
®
Pro sensors
Features
Ambient Light
Polarizing
Filter Kit
Filter Kit
LEDAPFKS
External Power Supply
(Strobed)
(Continuous)
+V
+V
-V
-V
OFF
-V
ON
P/N 121779 rev. B

LEDWA62X62W Summary of contents

  • Page 1

    ... Red or Infrared LED models White, Green, or Blue LED models Models LEDIA62X62W Infrared, 940 nm LEDRA62X62W Visible Red, 630 nm LEDWA62X62W White, All Visible LEDBA62X62W Blue, 464 to 475 nm LEDGA62X62W Green, 520 to 540 nm Light Source LED, see Models table above for wave lengths Illumination High-intensity area light Supply Voltage and Current Infrared: 24V dc @ 150 mA max ...

  • Page 2

    ... P/N 121779 rev. B Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • sensors@bannerengineering.com 55.9 mm (2.2") 4.2 mm 55.9 mm (0.17") (2.2") Installing the Area Light Polarizing Kit necessary to mount the camera at a 90° angle to a shiny ...