LEDWA62X62W BANNER ENGINEERING, LEDWA62X62W Datasheet

LED Area Light

LEDWA62X62W

Manufacturer Part Number
LEDWA62X62W
Description
LED Area Light
Manufacturer
BANNER ENGINEERING
Datasheet

Specifications of LEDWA62X62W

Led Module Type
Board + LED
Led Color
White
Power Module Configuration
Square
Supply Voltage
24V
Forward Current @ Test
200mA
Operating Temperature Range
0°C To +50°C
No. Of Pins
3
Forward Voltage
24V
Forward Current If
200mA
Printed in USA
Light Source
Illumination
Supply Voltage and Current
Connections
Construction
Useful Life
Operating Conditions
Cleaning Instructions
LEDIA62X62W
LEDRA62X62W
LEDWA62X62W
LEDBA62X62W
LEDGA62X62W
White, Green, or
Blue LED models
Area Light
Models
Brown
White
Wire
Blue
Red or Infrared
LED models
LED, see Models table above for wave lengths
High-intensity area light
Infrared: 24V dc @ 150 mA max.
PVC-jacketed 3-conductor 2 m (6.5') attached cable
Low-carbon steel with black zinc plating, acrylic window
10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after
10,000 hours and less than 50% (less than 40% for red and IR models) after 20,000 hours.
Temperature: 0° to +50° C (+32° to 122° F)
Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use
Infrared, 940 nm
Visible Red, 630 nm
White, All Visible
Blue, 464 to 475 nm
Green, 520 to 540 nm
any other chemicals for cleaning.
Controller Terminal Block
PresencePLUS Pro
Pin 4 (strobe)
Pin 1 (+V*)
• Low-cost, compact area lights for PresencePLUS Pro sensor. See Banner’s Web site
• Solid-state LED matrix; continuous or strobed operation is selectable via sensor
• Direct connection to PresencePLUS Pro or to an external power supply using 3
• Two bracket options available.
Pin 2 (-V*)
Color
LED..A62X62W Series Area Lights
LED Area Lights for use with PresencePLUS
(www.bannerengineering.com) for a complete lighting tutorial.
software.
discrete wires.
Specifications
Wiring Table
Models
02/07
FLTI (included with IR lights)
FLTR (included with LEDAPFKS)
FLTB or FLTG
FLTB
FLTG
External Power Supply
+5V dc
-V
All other colors: 24V dc @ 200 mA max.
Relative humidity: 90% at 50°C (non-condensing) max.
(Strobed)
Ambient Light
Filter Kit
+V
-V
Features
ON
OFF
®
Pro sensors
External Power Supply
(Continuous)
Polarizing
LEDAPFKS
+V
Filter Kit
-V
-V
P/N 121779 rev. B

Related parts for LEDWA62X62W

LEDWA62X62W Summary of contents

Page 1

... Red or Infrared LED models White, Green, or Blue LED models Models LEDIA62X62W Infrared, 940 nm LEDRA62X62W Visible Red, 630 nm LEDWA62X62W White, All Visible LEDBA62X62W Blue, 464 to 475 nm LEDGA62X62W Green, 520 to 540 nm Light Source LED, see Models table above for wave lengths Illumination High-intensity area light Supply Voltage and Current Infrared: 24V dc @ 150 mA max ...

Page 2

... P/N 121779 rev. B Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • sensors@bannerengineering.com 55.9 mm (2.2") 4.2 mm 55.9 mm (0.17") (2.2") Installing the Area Light Polarizing Kit necessary to mount the camera at a 90° angle to a shiny ...

Related keywords