ADNS-5700-H3MB Avago Technologies US Inc., ADNS-5700-H3MB Datasheet - Page 29

• Manufacturer Part Number: ADNS-5700-H3MB
• Description: USB SoC 3B Optical Sensor
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-5700-H3MB

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Get_HID_Input
Returns:
Default:
Addressed:
Configured:
Notes:
Get_Idle
Returns:
Default:
Addressed:
Configured:
Notes:
Get_Vendor_Test
Returns:
Default:
Addressed:
Configured:
Notes:
29
A1 01 00 01 00 00 nn 00
nn = 06 (with tilt wheel and 12 bit motion reporting)
nn = 05 (without tilt wheel and 12 bit reporting)
bb xx yy zz tw
bb xx yy zz
bb xx yy
bb = button byte
xx = X motion byte
yy = Y motion byte
zz = Z motion byte
tw = tilt wheel byte
Stall
Stall
Accept
If the device is configured, it will always respond with a report for this command, even if no
motion or button changes have occurred. In this case, it would report 00 for motion and simply
report the current button state. If a report is pending on endpt1, the data there will be reported
and the report on endpt1 cleared.
The mouse will only create new button/motion packets when it is in the Configured state
See USB byte format end of this section for more detail
A1 02 xx 00 00 00 01 00
xx = 00 All reports
xx = 01 First report
rr
rr = rate in multiples of 4mS
Accept
Accept
Accept
The third byte of the command is to select the Report ID. There is only one for the mouse -- so,
using 00 or 01 will work.
See also Set_Idle.
C0 01 00 00 xx 00 01 00
ii = ignore
xx = address of register to read
rr (depends on register read)
Accept
Accept
Accept
Address range (xx) is datasheet register range
(tilt wheel) OR
(Z-wheel) OR
(if no Z-wheel present)