V2-EVAL-UK FTDI, V2-EVAL-UK Datasheet - Page 30

• Manufacturer Part Number: V2-EVAL-UK
• Description: BOARD, EVALUATION, UK PSU
• Manufacturer: FTDI

Specifications of V2-EVAL-UK

• Kit Contents: 1 X V2-Eval Base Board, 1x 5V/1A Mains Adapter PSU, 1x USB A/B Cable, 1x USB Gender Changer
• Svhc: No SVHC (18-Jun-2010)
• Kit Features: VNC2 Embedded USB Host / Slave Chip Accessible Via
• Silicon Manufacturer: FTDI
• Silicon Family Name: Vinculum II
• Features: Embedded USB Host / Slave Chip, Two USB Type A Connectors
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.10
Four LEDs is provided on board. The LEDs enabled or disabled via jumpers JP7 – JP10. The LEDs are
controlled by the IOBUS signals on the VNC2.
Note - LED5 is also connected to jumper JP1 on the board. Care should be taken to ensure that LED is
not being driven by JP1 when controlling the LED from the VNC2.
Designator
LED3
LED4
LED5
LED6
Notes:
Table 5.15
(40)
(40)
Figure 5.15
LED5 is also connected to jumper JP1 on the board. Care should be taken to ensure
that LED is not being driven by JP1 when controlling the LED from the VNC2. Further,
when running VNC1L migrated firmwares, LED5 is not available on 48-pin package as
the I/O signal is used for interface selection purposes by the firmware.
User LEDs. LED3 – LED6.
User LED connections
User LEDs
Copyright © 2010 Future Technology Devices International Limited
32-PIN
12
14
-
-
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
VCN2 pin number
48-PIN
12
13
46
45
Document Reference No.: FT_000247
Clearance No.: FTDI#148
64-PIN
12
13
29
31
29