V2-EVAL-UK FTDI, V2-EVAL-UK Datasheet - Page 31

• Manufacturer Part Number: V2-EVAL-UK
• Description: BOARD, EVALUATION, UK PSU
• Manufacturer: FTDI

Specifications of V2-EVAL-UK

• Kit Contents: 1 X V2-Eval Base Board, 1x 5V/1A Mains Adapter PSU, 1x USB A/B Cable, 1x USB Gender Changer
• Svhc: No SVHC (18-Jun-2010)
• Kit Features: VNC2 Embedded USB Host / Slave Chip Accessible Via
• Silicon Manufacturer: FTDI
• Silicon Family Name: Vinculum II
• Features: Embedded USB Host / Slave Chip, Two USB Type A Connectors
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.11
Every user-defined LED have an enable/disable jumper. When jumper is closed LED will be illuminate
when driven low by one of the VNC2 pins. When jumper is opened LED is disconnected from the VCN2
pin.
Designator
JP7
JP8
JP9
JP10
Notes:
5.12
Push button switches connected straight to VNC2 pins. When the switch is pressed down,
a logic LOW appears on the corresponding VNC2 pin.
Designator
SW3
SW4
SW5
SW6
Notes:
(41)
Table 5.16
Table 5.17
(41)
(42) The IOBUS pins are shared by other connectors on the board. Care should be taken to
(42)
(42)
(42)
(42)
Figure 5.16
Figure 5.17
When running VNC1L migrated firmwares on 48-pin package, the jumper JP9 must be
removed, thus disabling this LED.
ensure that operation of the switches does not interfere with pins used by other headers
on the board.
LED enable/disable jumpers JP10 – JP14.
User push button switches
LED Enable/Disable Jumpers.
User Switches
LED Enable/Disable jumpers
User Push Button Switches
Copyright © 2010 Future Technology Devices International Limited
32-PIN
15
-
-
-
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
VNC2 Pin Number
LED affected
LED3
LED4
LED5
LED6
48-PIN
14
48
42
43
Document Reference No.: FT_000247
64-PIN
14
32
48
49
Clearance No.: FTDI#148
30