Q2686H DK WAVECOM, Q2686H DK Datasheet - Page 29

• Manufacturer Part Number: Q2686H DK
• Description: KIT. DEV, Q2686H, GSM/GPRS
• Manufacturer: WAVECOM

Specifications of Q2686H DK

• Kit Contents: Development Kit Q26 Board, Wireless CPU Soldered, SMA/FME Antenna, Adapter, RS232/USB Cable, CDROM
• Development Tool Type: Development Kit
• Kit Contents Descriptive: 2x Q2686H Modules, 1x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9 Control Functions
9.1
Once the Development Kit Q26 is connected to the external source (via J100 or
J101), the ON/~OFF switch can provide the VBATT to the Wireless CPU when it is
"ON".
After 1 second, it can be switched off. (refer to document. [2] or [5] and [3] or [6]).
9.2
The pushbutton ~RESET starts a general reset when it is pushed.
An Operating System reset is preferred to a HW reset.
9.3
The BOOT switch is only used to download a new software to the Wireless CPU via
UART1, with the specific download software provided by Wavecom.
Under normal conditions, it must be on "OFF" position.
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_BBD_Q26_UGD_001-004
~RESET
ON/~OFF
BOOT
©Confidential
Mode
Normal
Back-up
download
With
specific
download
software
Figure 7: Switches configuration
Table 7: BOOT configuration
the
BOOT
OFF
ON
Development Kit Q2686 and Q2687
ON/~OFF
ON
ON
Control Functions
September 11, 2006
Page: 28/ 64