4.16.10.29.64 DUCATI, 4.16.10.29.64 Datasheet - Page 4

CAPACITOR PP FILM 40UF, 450V, WIRE LEAD

4.16.10.29.64

Manufacturer Part Number
4.16.10.29.64
Description
CAPACITOR PP FILM 40UF, 450V, WIRE LEAD
Manufacturer
DUCATI
Datasheet

Specifications of 4.16.10.29.64

Capacitor Dielectric Type
Polypropylene
Capacitance Tolerance
± 5%
Voltage Rating
450VDC
No. Of Pins
2
Capacitor Mounting
Through Hole
Capacitance
40µF
Operating Temperature Range
-25°C To +70°C
Rohs Compliant
Yes
Capacitor Terminals
Quick Connect
Capacitor Case Style
CAN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Caratteristiche elettriche, prestazioni e definizioni
Tensione nominale Vn
È il valore efficace della tensione alternata sinusoidale che può
essere applicata al condensatore nelle normali condizioni di
lavoro.
Corrente nominale In
È il valore della corrente che passa nel condensatore di capacità
nominale alla tensione e alla frequenza nominale.
Gamma di frequenza di impiego
I condensatori possono essere usati per un campo di frequenza di
50-60 Hz. E possibile l’impiego a frequenze maggiori purchè
vengano rispettati i limiti per tensione, corrente, temperatura e
potenza.
Categoria di temperatura di funzionamento
Minima temperatura –25 C.
Massima temperatura +70 C o +85 C.
In conformità con le norme citate, tali temperature devono essere
intese come quelle misurate sulla superficie del condensatore.
Temperatura di stoccaggio
– 40 ... + 85 C.
Tolleranza di capacità
Capacità nominale,
Valori differenti di tolleranza sono disponibili a richiesta.
Angolo di perdita tan
Il valore della tangente dell’angolo di perdita misurato a 50Hz,
20 C alla tensione nominale, deve risultare:
tan
Massimi sovraccarichi ammessi
I condensatori possono funzionare nelle seguenti condizioni di
sovraccarico per tutta la gamma di temperature di categoria.
I max = 1,3 In
V max = 1,1 Vn
Il sovraccarico derivante dalla presenza contemporanea di tensio-
ne e corrente con valori superiori a quelli nominali anche se
contenuti nei limiti previsti, deve essere tale che la potenza
apparente Pa (leff x Veff) assorbita dal condensatore risulti di:
Pa
Sollecitazioni impulsive
I condensatori sono in grado di sopportare onde a fronte ripido con
una velocità massima di variazione della tensione di 20 V / s.
Resistenza di isolamento tra i terminali e la custodia
Misurato a 500 Vcc, 20 C dopo 30 secondi
Ri > 1000 Mohm
Funzionamento in corrente continua
Questi condensatori possono essere utilizzati con una tensione
continua non superiore al valore di picco della tensione nominale.
Vcc
Condensatori per tensione continua più elevata sono disponibili
a richiesta.
1,35·2 f·C·Vn
20·10
2 Vn
Informazioni generali
– 4
2
5%
3
Electrical specifications and definitions
Rated voltage Vn
The rms value of the sinusoidal AC voltage which can be applied
to the capacitor in normal working conditions.
Rated current In
The value of the current flowing through the capacitor of rated
capacitance at the rated voltage and frequency.
Duty frequency range
The capacitors can be used at a frequency range of 50-60Hz. Use
at higher frequencies is possible provided the voltage, current,
temperature and power limits are complied with.
Operating temperature class
Minimum temperature –25 C.
Maximum temperature +70 C or +85 C.
In accordance with the reference standards, these temperatures
are those measured on the surface of the capacitor.
Storage temperature
–40 ... + 85 C
Capacitance tolerance
Rated tolerance 5%
Different tolerance values are available on request.
Loss angle tan
The value of the tangent of the loss factor measured at 50 Hz,
20 C at the rated voltage is:
tan
Maximum permissible overloads
The capacitors can operate in the following overload conditions
throughout the temperature class range:
I max = 1.3 In
V max = 1.1 Vn
The overload deriving from the simultaneous presence of voltage
and current above the rated values, even if within the stated limits,
must be such that the apparent power Pa (Irms x Vrms) absorbed
by the capacitor is:
Pa
Pulsed stress
The capacitors are capable of withstanding steep wavefronts with
a maximum voltage variation speed of 20 V / s.
Insulation resistance between terminals and case
Measured at 500 Vdc, 20 C after 30 seconds.
Ri > 1000 Mohm
Direct current operation
These capacitors can be used with a DC voltage not exceeding the
peak value of the rated voltage.
Vdc
Capacitors for higher DC voltages are available on request.
1.35·2 f·C·Vn
20·10
2 Vn
General information
– 4
2

Related parts for 4.16.10.29.64