B41456B9229M EPCOS Inc, B41456B9229M Datasheet - Page 13

no-image

B41456B9229M

Manufacturer Part Number
B41456B9229M
Description
AL-ELKO SCREW TERMINALS 22000UF 100V
Manufacturer
EPCOS Inc
Series
B41456r
Datasheet

Specifications of B41456B9229M

Capacitance
22000µF
Voltage Rating
100V
Tolerance
±20%
Lifetime @ Temp.
12000 Hrs @ 85°C
Operating Temperature
-40°C ~ 85°C
Features
General Purpose
Ripple Current
45A
Esr (equivalent Series Resistance)
5.0 mOhm
Impedance
10 mOhm
Mounting Type
Chassis Mount
Package / Case
Radial, Can - Screw Terminals
Size / Dimension
2.532" Dia (64.30mm)
Height
4.161" (105.70mm)
Lead Spacing
1.122" (28.50mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Surface Mount Land Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
495-4228

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
B41456B9229M000
Manufacturer:
EPCOS
Quantity:
30 000
Part Number:
B41456B9229M000
Manufacturer:
EPCOS
Quantity:
78 644
Part Number:
B41456B9229M003
Manufacturer:
EPCOS
Quantity:
30 000
Part Number:
B41456B9229M003
Manufacturer:
EPCOS
Quantity:
78 647
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Polarity
Reverse voltage
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Safety information
Make sure that polar capacitors are connected
with the right polarity.
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
The internal structure of single-ended capacitors
might be damaged if excessive force is applied to
the lead wires.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
not be exceeded when connecting screw
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature
limits during soldering.
Page 13 of 17
Compact
B41456, B41458
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1.
"Mounting positions of
capacitors with screw
terminals"
11.4
"Mounting
considerations for
single-ended capacitors"
11.3
"Mounting torques"
11.5
"Soldering"
85 C

Related parts for B41456B9229M