NHD-4.3-480272ZF-ATXI#-T-1 Newhaven Display, NHD-4.3-480272ZF-ATXI#-T-1 Datasheet - Page 21

TFT Displays & Accessories 4.3 480 x 272 DPI w/ Touch Panel

NHD-4.3-480272ZF-ATXI#-T-1

Manufacturer Part Number
NHD-4.3-480272ZF-ATXI#-T-1
Description
TFT Displays & Accessories 4.3 480 x 272 DPI w/ Touch Panel
Manufacturer
Newhaven Display

Specifications of NHD-4.3-480272ZF-ATXI#-T-1

Diagonal
4.3 in
Maximum Operating Temperature
+ 60 C
Minimum Operating Temperature
- 20 C
Operating Current
50 mA
Operating Temperature Range
- 20 C to + 60 C
Product
Displays
Supply Voltage
3.3 V
Touch Panel
Touch Panel
Viewing Area (w X H)
95.04 mm x 53.86 mm
Pixel Density
480 X 282
Module Size (w X H X T)
105.5 mm x 67.2 mm x 3.8 mm
Backlighting
White LED
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
18.USING LCD MODULES
STANDARD
DOC.
(2) Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass, tweezers, etc.).
(3) N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors made of organic
(5) Wipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color
(6) Avoid contacting oil and fats.
(8) Do not put or attach anything on the display area to avoid leaving marks on.
(9) Do not touch the display with bare hands. This will stain the display area and degradate insulation between terminals (some
(10) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets,
LCD is composed of glass and polarizer. Pay attention to the following items when handling.
(1) Please keep the temperature within specified range for use and storage. Polarization degradation, bubble generation or
(4) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily
(7) Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers. After products
(11) As glass is fragile. It tends to become or chipped during handling especially on the edges. Please avoid dropping or
polarizer peel-off may occur with high temperature and high humidity.
substances which will be damaged by chemicals such as acetone, toluene, ethanol and isopropylalcohol.
contaminated, wipe gently with absorbent cotton or other soft material like chamois soaked in Isopropyl alcohol or Ethyl
alcohol. Do not scrub hard to avoid damaging the display surface.
jarring.
module or making any alterations or modifications to it.
fading.
are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air.
cosmetics are determinated to the polarizers).
moisture condensation or a current flow in a high-humidity environment.
Since LCM has been assembled and adjusted with a high degree of precision, avoid applying excessive shocks to the
PRODUCT
SPEC.
MODULE
NO.
不 
PAGE
2.50
20

Related parts for NHD-4.3-480272ZF-ATXI#-T-1