BFC246860104 Vishay, BFC246860104 Datasheet - Page 22

• Manufacturer Part Number: BFC246860104
• Description: Polyester Film Capacitors 100nF 10% 1000volts
• Manufacturer: Vishay

Specifications of BFC246860104

• Tolerance (+ Or -): 10%
• Voltage: 1000VDC/250VAC
• Temp Coeff (dielectric): PLYE
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 22.5mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 22.5mm
• Product Depth (mm): 9.5mm
• Product Length (mm): 26mm
• Lead Spacing (nom): 22.5mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 105C
• Capacitance: .1uF
• Package / Case: Not Required
• Tolerance: 10 %
• Voltage Rating: 1 KVolts
• Termination Style: Radial
• Lead Spacing: 22.5 mm
• Product: Metallized Polyester Film Capacitors
• Lead Free Status / RoHS Status: Compliant

MKT 467, MKT 468, MKT 469
Vishay BCcomponents
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors”.
The component temperature rise (ΔT) can be measured (see section “Measuring the component temperature” for more details)
or calculated by ΔT = P/G:
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
The temperature is measured in unloaded (T
The temperature rise is given by ΔT = T
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (U
2. The peak-to-peak voltage (U
www.vishay.com
72
• ΔT = Component temperature rise (°C)
• P = Power dissipation of the component (mW)
• G = Heat conductivity of the component (mW/°C)
W
(mm)
12.0
12.5
13.0
13.5
14.0
14.5
15.0
15.5
16.0
max.
P
) shall not be greater than the rated DC voltage (U
P-P
) shall not be greater than 2
For technical questions, contact: [e-mail]
C
- T
PITCH 10 mm
amb
MKT Radial Lacquered Type
amb
.
) and maximum loaded condition (T
-
-
-
-
-
-
-
-
-
DC Film Capacitors
√
PITCH 15.5 mm
2 x U
HEAT CONDUCTIVITY (mW/°C)
Rac
-
-
-
-
-
-
-
-
-
to avoid the ionisation inception level
Rdc
)
Thermocouple
C
).
PITCH 22.5 mm
-
-
-
-
-
-
-
-
-
Document Number: 28105
PITCH 27.5 mm
Revision: 08-Dec-08
27.0
30.0
30.0
30.0
30.0
33.0
33.0
37.0
37.0