1-104480-6 TE Connectivity, 1-104480-6 Datasheet - Page 25

• Manufacturer Part Number: 1-104480-6
• Description: CONTACT, RECEPTACLE, 26-22AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: MTEr

Specifications of 1-104480-6

• Pitch (mm): Not Requiredmm
• Gender: RCP
• Number Of Contacts: 1POS
• Number Of Contact Rows: Not Required
• Mounting Style: Cable
• Body Orientation: Straight
• Contact Plating: Gold Over Nickel
• Operating Temp Range: -65C to 105C
• Termination Method: Crimp
• Voltage Rating Max: 300VAC
• Contact Material: Copper Alloy
• Contact Resistance Max: 20mOhm
• Housing Material: Not Required
• Housing Color: Not Required
• Product Length (mm): 11.68mm
• Product Depth (mm): 2.66mm
• Connector Type: Contact, Crimp
• Current Rating: 3A
• Contact Termination: Crimp
• Rohs Compliant: Yes
• Contact Type: Signal
• Brand/series: AMPMODU MTE
• Centerline, Matrix: 0.100 "
• Diameter, Insulation: 0.025 to 0.060 "
• Length, Overall: 0.46 "
• Material, Contact: Copper Alloy
• Plating, Contact Mating Area: Gold
• Primary Type: Contact
• Wire Range: 26-22 AWG
• Wire, Awg: 26-22
• Contact Gender: Socket
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.64 – 1.52 [0.025 – 0.060]
• Connector Series: Short Point
• With Insulation Support: Yes
• Applied Pressure: Standard
• Contact - Rated Current (a): 3
• Voltage Rating (vac): 300
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Crimp Area Plating: Tin
• Wire Range (mm [awg]): 0.12-0.40² [26-22]
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Copper Alloy C7025
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Applies To: Wire/Cable
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant
• For Use With: AMPMODU Short Point Connectors
• Lead Free Status / Rohs Status: RoHS Compliant part

Material
Black thermoplastic, flame retardant
Part Numbers
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data
Low Profile Headers used with —
pages 135-140
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact Tyco Electronics.
Note: All part numbers are RoHS compliant.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
[8.51]
[8.51]
.335
.335
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
[3.40]
.134
[3.40]
.134
(See below.)
Break Line
(See below.)
Break Line
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Break Line
205
5