6-1394461-5 TE Connectivity, 6-1394461-5 Datasheet - Page 28

• Manufacturer Part Number: 6-1394461-5
• Description: PLUG, SOLARLOK, 6MM, POS
• Manufacturer: TE Connectivity
• Series: SolarLokr

Specifications of 6-1394461-5

• Gender: M
• Body Orientation: Straight
• Housing Material: Polyphenylene Oxide
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Current Rating (max): 25A
• Pitch (mm): Not Requiredmm
• Contact Material: Copper Zinc
• Operating Temp Range: -40C to 105C
• Mounting Style: Cable
• Contact Plating: Silver
• Product Depth (mm): 18mm
• Connector Type: Photovoltaic
• Contact Termination: Crimp
• No. Of Contacts: 1
• Connector Mounting: Cable
• Colour: Black
• Rohs Compliant: Yes
• Connector Mounting Orientation: Cable
• Product Type: Connector
• Insulation Diameter (mm [in]): 5.50 - 8.00 [.216 - .315]
• Type Of Connector: Cable Coupler
• Wire Size (mm² [awg]): 6.0² [10]
• Keying: Plus
• Contact Base Material: Copper Zinc
• Contact Finish: Silver Plate
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Quantity: 100
• Lead Free Status / RoHS Status: Compliant

26
IMPORTANT NOTE
tycoelectronics.com/solar
Catalog 3-1773458-6 | Issue Date 09/2010
Termination of the Cable
Wires and Crimping of
General Comments
of the Connectors
the Contacts
3.1 Handling
SOLARLOK Connectivity Systems for PV Installers
Assembly and Installation Guidelines
SOLARLOK plug connectors
ATTENTION : This connector is to be used only to interconnect firmly fixed cables
DO NOT DISCONNECT UNDER LOAD : Current path should only be disconnected
using approved disconnect devices.
Cable assemblies are labeled with PN : 1394470-1.
PROTECT AGAINST SHOCK : Ensure that conductors and their associated
connectors are separated from opposite polarity components.
Mounting and installation must be done by qualified and trained staff considering
all applying safety regulations. Failure to follow all instructions in Application
Specification 114-18488 (available at www.tycoelectronics.com/documents), including
using only approved TE tooling (if applicable), can result in improper installation
and/or crimping which is dangerous and may cause or contribute to electrical fires.
Should be used only by individuals with proper training and experience.
Any kind of pollution (dust, oil, humidity, etc.) during the assembly process or to the unmated
connector can degrade contact and connector performance. This applies in particular to the
seals and the crimping of the contacts. A clean assembly environment is essential.
•
•
•
•
When assembling the connectors, the following sequence must be followed:
1 : Stripping the wire to 9 +/- 1mm without damaging the strands
(please refer to application specification #114-74013)
SOLARLOK connectors use different crimp contacts for various wire gauges.
Possible wire gauges are 2.5 mm
The tools to be used are selected based upon the wire gauge.
For the application specification, please refer to specification #114-18488.
Dimensions are in inches and millimeters unless otherwise specified.
Values in brackets are standard equivalents. Dimensions are shown
for reference purposes only. Specifications subject to change.
2
, 4.0 mm
2
, and 6.0 mm
USA: 1-800-522-6752
Canada: [phone]
Mexico/C. Am.: [phone]
South America: [phone]
2
, AWG 14, AWG 12 and AWG 10.
Germany: [phone]
UK: [phone]
France: [phone]
China: [phone]
Fig.1