11 716-50-5-4/003 -Z Huber + Suhner AG, 11 716-50-5-4/003 -Z Datasheet - Page 13

no-image

11 716-50-5-4/003 -Z

Manufacturer Part Number
11 716-50-5-4/003 -Z
Description
Manufacturer
Huber + Suhner AG
Type
7/16r
Datasheet

Specifications of 11 716-50-5-4/003 -Z

Gender
PL
Body Style
Straight
Terminate To
Coaxial Cable
Mounting Style
Cable
Termination
Solder
Operating Temp Range
-40C to 85C
Body Plating
Sucoplate
Contact Plating
Silver
Contact Material
Brass
Body Material
Brass
Impedance
50Ohm
Lead Free Status / RoHS Status
Supplier Unconfirmed
> for corrugated cables
> cable entry clamp
> centre contact soldered
> degree of protection IP 68
7/16 COMBINATION SYSTEM
The HUBER+SUHNER 7/16 combination system enables efficient, low cost and flexible stocking of 7/16 cable con-
nectors. The 11 basic parts can be combined to obtain 48 different cable connector types for almost all coaxial
cables with 2.95 mm (.116 in.), 4.7 mm (.185 in.) or 7.25 mm (.285 in.) dielectric diameter. The cable entries are
available with both crimp type or pressure-sleeve (no special tools) cable attachment.
Centre conductors are soldered. All cable entries can be used together with any of the combi-heads. Taper sleeves
can be supplied for the crimp type cable entries.Straight or right angle configurations are possible with the same
sub-assemblies. All types have 50
is limited to 1.0 kV rms.
Combi-heads
> plug (male)
Right angle bulkhead cable jacks (female)
Cable groups see page 28
HUBER+SUHNER type
29_716-50-5-400/003_-Z
HUBER+SUHNER type
11_716-50-0-2/003_-E
Item no.
22658301
Item no.
22641432
impedance and are suitable for frequencies up to 1 GHz. The working voltage
Cable group (example)
M5
Packaging
single
HUBER+SUHNER 7/16
(SUCOFEED ¼”HF) bulk 10 pcs.
Assembly tools see page 385
Weight
100 g/3.50 oz.
Packaging
Assembly instruction/
Mounting hole
27315 / ML 110
Notes
cable entries see page 319/320
Mounting holes see page 412
Weight
171 g/6.03 oz.
317

Related parts for 11 716-50-5-4/003 -Z