B32656S8684J564 EPCOS Inc, B32656S8684J564 Datasheet - Page 26

• Manufacturer Part Number: B32656S8684J564
• Manufacturer: EPCOS Inc
• Type: Snubberr

Specifications of B32656S8684J564

• Tolerance (+ Or -): 5%
• Voltage: 850VDC/450VAC
• Temp Coeff (dielectric): PLYP
• Mounting Style: Solder Lug
• Construction: Plastic Case
• Failure Rate: Not Required
• Seated Plane Height: Not Requiredmm
• Product Diameter (mm): Not Requiredmm
• Product Depth (mm): 16mm
• Lead Spacing (nom): Not Requiredmm
• Lead Diameter (nom): Not Requiredmm
• Operating Temp Range: -55C to 100C
• Capacitance: .68uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

Cautions and warnings
The table below summarizes the safety instructions that must always be observed. A detailed de-
scription can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Resistance to
vibration
Please read Cautions and warnings and
Important notes at the end of this document.
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
B32656S
Snubber (wound)
Safety information
Make sure that capacitors are stored within the
specified range of time, temperature and humidity
conditions.
Avoid external energy, such as fire or electricity
(passive flammability), avoid overload of the
capacitors (active flammability) and consider the
flammability of materials.
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Page 26 of 31
Reference chapter
"General technical
information"
4.5
"Storage conditions"
5.3
"Flammability"
5.2
"Resistance to vibration"