OPIA406CTUE Optek, OPIA406CTUE Datasheet

Transistor Output Optocouplers Optocoupler

OPIA406CTUE

Manufacturer Part Number
OPIA406CTUE
Description
Transistor Output Optocouplers Optocoupler
Manufacturer
Optek
Datasheet

Specifications of OPIA406CTUE

Maximum Fall Time
200 us
Maximum Input Diode Current
50 mA
Maximum Reverse Diode Voltage
6 V
Maximum Rise Time
200 us
Output Device
Photodarlington
Configuration
1 Channel
Input Type
DC
Maximum Collector Emitter Voltage
40 V
Maximum Collector Emitter Saturation Voltage
1 V
Isolation Voltage
2500 Vrms
Current Transfer Ratio
2000 %
Maximum Forward Diode Voltage
1.4 V
Maximum Collector Current
90 mA
Maximum Power Dissipation
120 mW
Maximum Operating Temperature
+ 150 C
Minimum Operating Temperature
- 55 C
Package / Case
SSOP-4
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
Features:
Agency Approvals:
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or
Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical
isolation voltage of 2,500 or 3,750 Volts(RMS), these products meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photo sensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 3,750 Volts(RMS). A variety of LED and photo
sensor configurations are available depending on the system requirements.
The Current Transfer Ratio (CTR) is determined using the output current and input current for analog photo
sensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
All SMD products are shipped in a shipping tube with “TR” identified on the end of the part number.
Applications:
RoHS
2,500 or 3,750 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
UL Certification No: E58730
VDE No:
High voltage isolation: 2,500 or 3,750 Volts(RMS)
PCBoard power system isolation
Industrial equipment power isolation
Medical equipment power isolation
Office equipment
Example:
40026577(OPIA401-404), 40026553(OPIA405-409)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPI401ATRE is a 4-Pin SMD shipped in tape and reel (TR)
CTR
=
Photosenso
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
LED
Current
r
Current
=
10
20
mA
mA
*
100
=
200
Issue B
Page 1 of 31
9/2010

Related parts for OPIA406CTUE

OPIA406CTUE Summary of contents

Page 1

... Medical equipment power isolation • Office equipment OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 − ...

Page 2

... A K OPIA404B A K OPIA405C A OPIA406C A K OPIA407C A-K K-A OPIA408C OPIA409C OPIA414B A K OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page Phone: (972) 323-2200 or (800) 341-4747 Package Style C (SSOP ...

Page 3

... Information Sensor Part Number Suffix: Packaging OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 CTR Typ (µs) ...

Page 4

... OPIA406, OPIA408 OPIA409 Power Dissipation All except the part numbers noted below OPIA405, OPIA406, OPIA407, OPIA408, OPI409 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page unless otherwise noted) OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 -55° ...

Page 5

... Fall Time OPIA402, OPIA414 t OPIA405, OPIA407 F OPIA404 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 MIN TYP MAX - 1 ...

Page 6

... OPIA405(See Table, page 3) OPIA406, OPIA408 OPIA407 OPIA409 OPIA414 Floating Capacitance C OPIA405, OPIA406, OPIA407, f OPIA408, OPIA409 R Isolation resistance ISO OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page MIN TYP MAX - - 1 1 ...

Page 7

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA401 FAX: (972) 323-2396 sensors@optekinc ...

Page 8

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA401 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 Forward Current— ...

Page 9

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA402 FAX: (972) 323-2396 sensors@optekinc ...

Page 10

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA402 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 11

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA403 FAX: (972) 323-2396 sensors@optekinc ...

Page 12

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA403 Forward Current—I (mA) F OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc ...

Page 13

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA404 FAX: (972) 323-2396 sensors@optekinc ...

Page 14

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA404 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 15

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA405 FAX: (972) 323-2396 sensors@optekinc ...

Page 16

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA405 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 17

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA406 FAX: (972) 323-2396 sensors@optekinc ...

Page 18

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA406 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 Forward Current— ...

Page 19

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA407 FAX: (972) 323-2396 sensors@optekinc ...

Page 20

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA407 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 21

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA408 FAX: (972) 323-2396 sensors@optekinc ...

Page 22

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA408 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 Forward Current— ...

Page 23

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA409 FAX: (972) 323-2396 sensors@optekinc ...

Page 24

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA409 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 25

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA414 FAX: (972) 323-2396 sensors@optekinc ...

Page 26

... OPIA401 through OPIA409, OPIA414 SMD, SOP and SSOP Packages OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page OPIA414 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 27

... NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 ...

Page 28

... M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred 4.40mil SMD w/ 2.54mil Lead- Spacing) SSOP = Shrink SOP Packages (Referred 3.60mil SMD with 1.27mil Lead-Spacing) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page ...

Page 29

... MILLIMETERS] Tube Packaging Specifications— SOP (Mini-flats) and SSOP— (TU): OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc ...

Page 30

... Quantity: 4-pin (SMD): 1000pcs/Reel 4-pin (SOP): 1000pcs/Reel 4-pin (SSOP): 3000pcs/Reel Reel: OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 9/2010 Page Direction: OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 ...

Page 31

... OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 .078± ...

Related keywords